PDA

View Full Version : Looks like I will be buying a new shaft and strut but which one.


brettmess24
07-08-2010, 10:15 PM
Looking at skidim.com and wondering which shaft I need for my 07 x1? Is it part number 1904 or 1905? Also what tools are a must when changing the shaft? Anything else I should replace at the same time?

Cloaked
07-08-2010, 11:25 PM
Looking at skidim.com and wondering which shaft I need for my 07 x1? Is it part number 1904 or 1905? Also what tools are a must when changing the shaft? Anything else I should replace at the same time?I don't know but I suspect it's the larger diameter shaft.

Point here is to call skidim tomorrow, early, They will hook you up and have it out tomorrow if you call early enough. Good folks to work with.

brettmess24
07-08-2010, 11:30 PM
I don't know but I suspect it's the larger diameter shaft.

Point here is to call skidim tomorrow, early, They will hook you up and have it out tomorrow if you call early enough. Good folks to work with.

That is exactly what I wanted to hear. As I filled my cart with what I thought I needed for the entire replacement of shaft and strut i was at $925 so I don't want to waste the time on one wrong part as summer is too short!:D

Thanks

deployedjosh
07-09-2010, 08:51 PM
If I were doing this job, I'd put on a dripless shaft system as well.

Cloaked
07-09-2010, 09:06 PM
If I were doing this job, I'd put on a dripless shaft system as well.Agreed.

Where in the southeast are you guys from?

east tx skier
07-09-2010, 10:03 PM
Pretty sure it is the 1.125" splined shaft.