View Full Version : Perfect Pass working weird ?
05-27-2010, 01:04 PM
I have a Star Gazer that was working fine this week-end at 9.5mph to do wakesurfing but when I switch it to Slalom mode...it wasn't able to hold 30.4, 32.3mph ??? My trottle was all out I don't get it...I had to hold speed manually for that speed...last year...everything was fine. What is going on ?:confused:
Contact PerfectPass directly. My experience has been they offer awesome customer support.
Click here (http://www.perfectpass.com/perfect_pass_contact_us.html) to view there contact info page of their website.
06-02-2010, 10:48 AM
Try this out, seemed to work for me before I switched to Zero Off in my 2008, with the same Stargazer system that was in my 2005. Also it worked for a friends Malibu as well.
Tech Note 5 - Star Gazer Three Event RPM Setting vs. Inverted
The vast majority of boats with mechanical Star Gazer Systems operate with a Standard V8 tachometer setting. The odd boat will run smoother and maintain a 'tighter' control when the signal is set as "inverted".
To determine which is ideal for your boat, do the following:
Watch the digital PP tachometer at idle. Should be steady at about 650. If it is reading high, or is “bouncing”, your boat may run better as INVERTED
Set the system in RPM Mode at 3400 RPM and run in open water. The system should engage and lock on 3400 very quickly and maintain a very steady RPM digital tachometer readout. (Should not move more than 10 rpm)
If during this test your PerfectPass digital tachometer does not settle well, or you see spikes (particularly on the high side of 3400) you may wish to try the “inverted” setting and perform this same test.
Go to USER SETTINGS (Menu & Up Keys together) and move to ENGINE SET UP. Press the Up Key to select Standard or Inverted V8.
Ultimately, you should set this at whatever setting gives the smoothest tach reading
06-02-2010, 11:01 PM
Problem solve ! Thanks....I did calibrate the rpm in slalom mode and now it work find !