PDA

View Full Version : Problems with Speedo/ perfect pass staying calibrated?


Eric2010MCX2
05-25-2010, 10:02 PM
So for some odd reason our brand new 2010 X2 did not come with a calibrated speedo from the factory. Its about 4-6 mph off consistantly.

We ran it the a few times with a handheld GPS and the speedo calibration screen on the BIG shows it is almost perfectly calibrated.

HOWEVER, when you switch back out of the screen, neither the speedo in the BIG, in perfect pass, OR the actual speedo guage show the correct speed.

Any ideas of what's happening?

chippy1971
05-25-2010, 11:55 PM
Here is my advice. if you are going to use Perfect Pass I would always set it to use RPM and not speed. The reason is that RPM is going to be more exact for each wakeboarder / skier.

I ski on a river and it is tidal. So if I use the speedo I will be out all the time.

I have found that once you have worked out what the skier wants with regards to rpm then it is so easy to keep it there.

Just my two cents.