PDA

View Full Version : aftermarket exhaust manifolds


slickwater1
04-07-2010, 10:00 PM
ok so I am ready to put new exhaust manifolds on the 93 190. it has the ford 351, and needing an exhaust upgrade. the old manifolds are pretty rusted up and wanting to upgrade. What you think?

mayo93prostar
04-07-2010, 10:50 PM
skidim has all the parts. they are not that cheap regardless of where you get them.

H20skeefreek
04-07-2010, 11:39 PM
the only difference you will find is the pcm/indmar type and the mercury type. You won't find anything else. I found someone who was willing to cast some in aluminum (they have them for chevy's), but I was going to have to pay near 1k for the design. I told the guy where he could stick it.

TMCNo1
04-08-2010, 08:27 AM
http://www.skidim.com/products.asp?dept=1068

markismm
04-08-2010, 08:39 AM
Send me a P.M. and we can discuss a discounted price on those manifolds. I have a source that can most likely get you the manifolds for at least $30 -$40 less for the same or better brand new manifolds. If you send me a P.M. I will send you my number so we can discuss.

markismm
04-08-2010, 08:41 AM
Send me a P.M. and we can discuss a discounted price on those manifolds. I have a source that can most likely get you the manifolds for at least $30 -$40 less for the same or better brand new manifolds. If you send me a P.M. I will send you my number so we can discuss.

I see now that you are a guest and may not be able to send me a private message. Go ahead and register on the site (its free) if have not already done so and then send me a message.

slickwater1
04-08-2010, 09:52 AM
ok I think that I am now a Member.

slickwater1
04-08-2010, 09:53 AM
nope still showing guest. markismm my email is blairr@caywood.org. feel free to give me any information through that email. I don't know what else to do on my account, I have emailed phil and when i click on my profile it shows i have 23 post. then come to the site and still a guest.

TRBenj
04-08-2010, 10:28 AM
Theyre available, but not cheap. Be prepared to spend almost $2k.

http://i41.photobucket.com/albums/e260/TRBenj/motor_side.jpg

slickwater1
04-08-2010, 02:04 PM
not looking for anything quite as impressive as those. i just need new ones.

Mr_Woodcock
04-08-2010, 02:20 PM
Those are amazing...

engkid_486
04-08-2010, 03:29 PM
There is a guy on Ebay that sells new ones for around 150 with all hardware and gaskets. Do a search on Ebay for FREDWARNER.

robin
04-11-2010, 09:20 PM
has anyone ever added the indmar ETX aluminum exhaust manifolds as aftermarket? i thought about it a couple of years ago, the indmar tech quoted me $800 each for them (one piece design). he said theyd increase HP and MPG, but he said he didnt think enough to justify the added cost.

Auer2
04-17-2010, 08:30 PM
Did you get these from overseas or is there a distributor here in the states?

Auer2
04-17-2010, 08:31 PM
Did these manifolds come from over seas or is there a distributor here in the states?