Swim platform bracket removal

[Timmyt]

I'm trying to replace my swim platform brackets on our '06 X2. I've taken the 5 screws out of the piece that attaches to the transom, however it's still firmly attached to the hull. Tried prying it using a piece of wood to protect the gel but it didn't seem to want budge. Is there anything else I should be doing to get this separated from the transom?
Thanks!

[BoulderX45]

I'm trying to replace my swim platform brackets on our '06 X2. I've taken the 5 screws out of the piece that attaches to the transom, however it's still firmly attached to the hull. Tried prying it using a piece of wood to protect the gel but it didn't seem to want budge. Is there anything else I should be doing to get this separated from the transom?
Thanks!

I had a nuts and bolts on my bracket when I replaced it on my 06 X-45. I think it had some kind of silicone or epoxy on it also.

[Yellow X9]

It has an adhesive between the bracket and transom, gonna have to use some heat, to loosen the adhesive-a torch works the best. I replaced mine over the winter and thats what I had to do-it worked for me

[Timmyt]

Thanks, guys. I'll put some heat to it.