View Full Version : Looking for the wired remote Clarion

10-20-2009, 08:22 PM
for the Clarion XMD3

the remote part number is M301RC

there are none on eBay...


04-17-2011, 05:21 PM

You ever find the remote you needed.

04-18-2011, 03:23 AM
You can use any of the clarion 6-pin remotes with that receiver. Here is a chart that shows head units vs remotes. It has been posted here before.

04-18-2011, 11:32 AM
I searched world wide and could not come up with a new M301RC remote. I also found out that the M301RC have been plaqued with issues over the years. Mine just simple stopped working, and when I disasembled it, it had moisture and mold inside the remote. I ended up putting the 2 inch non-display version CMRC2-BSS back into the original 2 1/16 inch hole (you do have to wrap tape a couple times around the remote to take up the 1/16 inch difference). The newer alpha display remote CMRC1-BSS require a 3 inch hole, and with the curvature of the X-10 posterior it wouldn't lay flat. My M301RC was factory installed with my XMD3 head unit.

Clarion Marine Remotes Compatibility PDF - Page 24 and 25 (http://www.clarionrewards.com/teamclarion/app_guide/PDFs/2010%20Application%20Guide%20-%20Marine%20Audio.pdf)