PDA

View Full Version : Opinions wanted on how this will look


DooSPX
10-16-2009, 05:52 PM
This grant Fibertech wheel (can also be seen on the 1993 that 35th Ann.'s brother is working on in the General Section...

and this throttle knob, but with the red lines painted blue...


on my boat...

Bizz238
10-16-2009, 09:06 PM
Love the wheel's design...it only lacks a genuine MC logo!!!
But if I were ok with ''tunning'', I'd go for that one for sure...

DooSPX
10-16-2009, 09:13 PM
Love the wheel's design...it only lacks a genuine MC logo!!!
But if I were ok with ''tunning'', I'd go for that one for sure...

thanks.... I am getting a MC logo for the steering wheel from Jim and Chuck at BAWS!

thatsmrmastercraft
10-16-2009, 11:43 PM
So now you have added two more things that I have to buy for the boat. Enough already.......my list is plenty long all on its own.

DooSPX
10-17-2009, 08:42 AM
So now you have added two more things that I have to buy for the boat. Enough already.......my list is plenty long all on its own.

I have a few things as well.
now, I want to do the wheel, knob, bimini, and then a CNC prop.
later, I want to do an intake, gt40-p heads and a cam.

KnoxX2
10-17-2009, 09:20 AM
I think it looks great! Might look at upgrading mine. Where did you find the wheel?

DooSPX
10-17-2009, 09:48 AM
I think it looks great! Might look at upgrading mine. Where did you find the wheel?

http://www.summitracing.com/parts/GRT-1461/?image=large

Kingsley X-1
10-24-2009, 03:29 PM
IMO it is too much, kinda looks like the steering wheel was put on by the guys from "Pimp My Ride" but if everyone had the same taste this world would sucks a$$. knob in all silver would be neat. just hope it doesnt get to hot in the summer sun.

03 35th Anniversary
10-24-2009, 03:58 PM
Love the wheel's design...it only lacks a genuine MC logo!!!
But if I were ok with ''tunning'', I'd go for that one for sure...

thanks.... I am getting a MC logo for the steering wheel from Jim and Chuck at BAWS!

We got Lucky on the one we did. When we took the old wheel off, the 25th Anniversary Logo fell off so we just glued the original logo on the center piece of the new wheel.

DooSPX
10-24-2009, 06:37 PM
have any updated pictures of the boat or alteast better pictures of the wheel on the boat?

Monte
10-24-2009, 06:51 PM
Looks great! Just make sure to coat all of your bolts with clear, or better yet get some stainless steel. The bolts Grant uses have a tendency to rust.

03 35th Anniversary
10-25-2009, 08:04 AM
have any updated pictures of the boat or alteast better pictures of the wheel on the boat?

Best I can do for now.......

Bizz238
10-26-2009, 04:40 AM
I'm impressed!!! It really look great! I looked at the other models and I think you chose good...

88 PS190
10-26-2009, 12:26 PM
How does it feel?

nmcjr
10-31-2009, 01:46 PM
Looks nice--did you have to use a puller on the hub, or do the 5 outer bolt holes line up? Mine is pretty faded looking so I was thinking about replacing too....

03 35th Anniversary
10-31-2009, 02:31 PM
Looks nice--did you have to use a puller on the hub, or do the 5 outer bolt holes line up? Mine is pretty faded looking so I was thinking about replacing too....

5 outer bolts line up.....