PDA

View Full Version : 2003 X-10 Wakeboard racks


razorback64
09-16-2009, 12:09 AM
Just upgraded my '90 TriStar 190 to a 2003 X-10.
Pulling into my dock, I bent one of the OEM spring clamp wake board racks. Need to replace or straighten the round rods the clamp slides on and broke one of the release lever rods that attach to the ratched latch rod.
Dealer I checked with says these parts are no longer available. Apparently MC's contractor went out of business.
Anyone have access to these parts or know of someone that is making them?

MCRambo1
09-16-2009, 03:27 PM
I had a customer of mine with the same issue. We sent the racks off to gere marie and they were able to repair them. I appologize I don't have an contact info for them but they are based out of Chicago, and you should be able to find them on the internet. Good luck.

EarlyriserX9
09-16-2009, 03:30 PM
I may be wrong, but can't you upgrade your racks to the new clamp style? I'm pretty sure I've seen boats with the same tower we have with the newer racks, they just don't spin. Just a thought.

corey
09-25-2009, 02:41 PM
The clamp style racks will not bolt on because the tower lacks the hole for the handle to go through. In theory you could have someone cut this into the tower, it would be costly but you could upgrade your racks so it might be worth it in the long run.

You might want to call the guys at New Dimension Towers to see if they have any type of racks that will work with that hole pattern.

corey
10-13-2009, 07:41 PM
UPDATE!!!

I have it on good authority that you can replace your rack with new arms from Comptech (same guys that make sky ski racks) they can custom make them to fit your exisiting hole pattern!

Similar to http://www.skyski.com/node/323

largemule
11-20-2009, 04:01 PM
I had the same problem and was unable to replace them. I am selling my racks on ebay...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130345826912&viewitem=&sspagename=STRK%3AMESELX%3AIT