PDA

View Full Version : Raw Water Pump rebuild-HELP!!


DooSPX
09-15-2009, 09:33 PM
Where can I get the bearing for my RWP on my 91 PS190. I looked on skidim.com, but only saw the rear seal...
Help please!

thanks,
Jason

TMCNo1
09-15-2009, 10:12 PM
Where can I get the bearing for my RWP on my 91 PS190. I looked on skidim.com, but only saw the rear seal...
Help please!

thanks,
Jason


A MC dealer can get or has a rebuild kit available.

Here is the Johnson RWP rebuild pdf tutorial passed along by Enginenut @ Indmar, including part numbers, http://www.mastercraft.com/teamtalk/showpost.php?p=459346&postcount=12

Check by phone with Skidim for the parts too.

Then again, buying a whole new pump might be the path of least resistance!

thatsmrmastercraft
09-16-2009, 01:48 AM
Perhaps the path of least resistance, but he would have to disassemble the new pump to polish and detail the inside anyway, so why not rebuild it?

hkallestad
09-16-2009, 03:44 AM
Take the pump apart and measure the bearing, most likely a common size, then buy a couple of quality sealed bearings and voila!