PDA

View Full Version : Boat Buddy isn't Working


shepherd
08-07-2009, 09:39 AM
Why do so many people view the sex spams . If no one would view them , maybe the spammers would go away .

Ahhh......because it has the word sex in it.

Just checking. :D

Hoosier Bob
08-07-2009, 10:09 AM
Make sure the pin is in the right place and you have greased your runners!;)

scott023
08-07-2009, 10:18 AM
Make sure the pin is in the right place and you have greased your runners!;)

They should be self greasing, shouldn't they? :D

flipper
08-07-2009, 10:22 AM
They should be self greasing, shouldn't they? :D

They are most of the time but every once in a while you gotta lick the bow eye

shepherd
08-07-2009, 10:37 AM
Don't you have to tweak the little doohickey in the bow eye too? :confused:

flipper
08-07-2009, 10:38 AM
Don't you have to tweak the little doohickey in the bow eye too? :confused:

not if you do everything right

shepherd
08-07-2009, 10:42 AM
not if you do everything right

Hmmm, maybe I'm not backing down far enough before I try to load it.

coz
08-07-2009, 10:52 AM
Hmmm, maybe I'm not backing down far enough before I try to load it.

You gotta have the right buddies.

http://farm4.static.flickr.com/3215/3131036205_c48a8d79c0_o.jpg

Hoosier Bob
08-07-2009, 11:06 AM
Don't tweak it too hard! The "Buddy" likes a soft entry! It does help if you lick it first as noted by another member!;)Don't you have to tweak the little doohickey in the bow eye too? :confused:

flipper
08-07-2009, 11:08 AM
Soft entry, but if that doesn't work, I've had luck with just slamming it to get it to lock in

shepherd
08-07-2009, 11:13 AM
Soft entry, but if that doesn't work, I've had luck with just slamming it to get it to lock in

I've had luck with slamming it too, but I'm just afraid that I'm going to damage it one day and then not be able to use it again until I fix it or find a replacement. Sometimes I hit it so hard the whole truck shudders violently.

scott023
08-07-2009, 11:20 AM
I've had luck with slamming it too, but I'm just afraid that I'm going to damage it one day and then not be able to use it again until I fix it or find a replacement. Sometimes I hit it so hard the whole truck shudders violently.

No worries Shep... I have heard that these buddies are capable a repairing themselves. I have first hand knowledge of the bow eye has been loosened from overuse, only to tighten itself up again.

BTW, I think you are really exaggerating things when you say the whole truck shuddered.;)

Finnsdad
08-07-2009, 01:59 PM
I slammed it too hard and bent the pin :eek:

flipper
08-07-2009, 02:11 PM
I slammed it too hard and bent the pin :eek:

There is no fix for that....sorry to hear about that

Hoosier Bob
08-07-2009, 02:16 PM
Happens quite often actually. Just cartilage, it will heal!:DThere is no fix for that....sorry to hear about that

funk
08-07-2009, 02:19 PM
Soft entry, but if that doesn't work, I've had luck with just slamming it to get it to lock in

You have to make sure to spit on it prior to backin' er down!

shepherd
08-07-2009, 02:29 PM
Thanks for the input guys. Should I power load or just slide in gently and hook it manually?

shepherd
08-07-2009, 02:32 PM
BTW, I think you are really exaggerating things when you say the whole truck shuddered.;)

You're not familiar with my boat buddy. It happens all the time. :cool:

76S&S
08-07-2009, 02:37 PM
LMFAO

Outside of the swimsuit thread, this has to be the best thread ever!

pkskier
08-07-2009, 04:04 PM
I'm really worried about you guys. I think you may have too much time or something on your hands. But, I hope ya'll can keep it up, it is quite enjoyable.

flipper
08-07-2009, 04:08 PM
I'm really worried about you guys. I think you may have too much time or something on your hands. But, I hope ya'll can keep it up, it is quite enjoyable.

It's either this or do what they pay us to do:D

shepherd
08-07-2009, 04:12 PM
No, this is serious. Sometimes my boat buddy really sucks.

Wait.... is that bad? :confused:

flipper
08-07-2009, 04:13 PM
Sorry for the thread jack, but does anybody use tie downs?

flipper
08-07-2009, 04:14 PM
No, this is serious. Sometimes my boat buddy really sucks.

Wait.... is that bad? :confused:

Hard to say, pics might help:D

shepherd
08-07-2009, 04:15 PM
Sorry for the thread jack, but does anybody use tie downs?

No. They aren't necessary.

But I always hook on the strap after the boat buddy is engaged.

scott023
08-07-2009, 04:27 PM
Sorry for the thread jack, but does anybody use tie downs?

Depends Flip... we do sometimes just to add a little excitement to the launching process. The wife likes to it this way, so sometimes I give in and we tie her down.

funk
08-07-2009, 04:39 PM
We only use tie downs if it's going to be a long ride or unfamiliar territory, otherwise I let her bounce as much as she wants. As long as the front is engaged everything seems to do it's job. No damage in 6 years or so! It has hit the side quite a bit but never the bottom.

Hoosier Bob
08-07-2009, 04:45 PM
I remember my first Boat Buddy. Would not even think of releasing unless I used tie downs. Liked to be slapped around and and berated as well! I remember sitting on the ramp telling my BB that it was worthless and could not handle a hard load! Maybe I should just go without! You squeek! You leave marks! You smell like a fish!;)We only use tie downs if it's going to be a long ride or unfamiliar territory, otherwise I let her bounce as much as she wants. As long as the front is engaged everything seems to do it's job. No damage in 6 years or so! It has hit the side quite a bit but never the bottom.

TMCNo1
08-07-2009, 04:46 PM
No, this is serious. Sometimes my boat buddy really sucks.
Wait.... is that bad? :confused:
Hard to say, pics might help:D

Picture this,
Is doing a powerturn while loading called a 69 load! :rolleyes:

PA Prostar
08-07-2009, 04:51 PM
Thanks for the input guys. Should I power load or just slide in gently and hook it manually?

That's a hard question. It depends on the angle, water flow, and prior use of the buddy. Sometimes a power load is necessary, sometimes it can slide. Again, depends on the ramp you're using that day. I think it's important though always to have your buddy in the "set" position ready to unload or load as the situation occurs.

shepherd
08-07-2009, 05:06 PM
Picture this,
Is doing a powerturn while loading called a 69 load! :rolleyes:

I don't know what it's called, but I imagine it would do some serious damage to the running gear! And probably the bunks too! :eek:

scott023
08-07-2009, 05:08 PM
That's a hard question. It depends on the angle, water flow, and prior use of the buddy. Sometimes a power load is necessary, sometimes it can slide. Again, depends on the ramp you're using that day. I think it's important though always to have your buddy in the "set" position ready to unload or load as the situation occurs.

I agree with Prostar completely. The ramp you are using on any given day is the main determiner for what angle you'll have to approach at, as well as speed and force. There have been times that I have had to drift into the buddy and others I have had to really ram it in there, as it seemed teh buddy didn't wasnt to accept the offering.

Weather can also influence useage, all though that is a different story. :D

funk
08-07-2009, 05:11 PM
I just ram it as hard as I can and deal with the consequences later! A cost of a new BB is marginal by comparison.

scott023
08-07-2009, 05:17 PM
I just ram it as hard as I can and deal with the consequences later! A cost of a new BB is marginal by comparison.

How many buddies have you gone through Funk?? Sounds like you are not doing all you can to make it work with your buddies.

flipper
08-07-2009, 05:19 PM
I remember my first Boat Buddy. Would not even think of releasing unless I used tie downs. Liked to be slapped around and and berated as well! I remember sitting on the ramp telling my BB that it was worthless and could not handle a hard load! Maybe I should just go without! You squeek! You leave marks! You smell like a fish!;)

Ahhh yes, my first experience with a boat buddy. I remember it well. It was at night, it was dark and I was scared being that i had never used one and I was all alone.:D

scott023
08-07-2009, 05:26 PM
Ahhh yes, my first experience with a boat buddy. I remember it well. It was at night, it was dark and I was scared being that i had never used one and I was all alone.:D

I remember it too, but it was daylight. I sure as h3ll didn't slap it around though, I was just happy about getting to use one. I sure as heck didn't start really abusing it until I was comfortable and confident enough in my abilities to use it.

funk
08-07-2009, 05:28 PM
How many buddies have you gone through Funk?? Sounds like you are not doing all you can to make it work with your buddies.

Back in the day, it was quite a few. I put a protective platinum ring around one a few years ago and it's held up just fine every since.

Hoosier Bob
08-07-2009, 06:08 PM
Must have ben a different Boat Buddy! Mine came from a dealership on the wrong side of town! Funny Scotty!8pI remember it too, but it was daylight. I sure as h3ll didn't slap it around though, I was just happy about getting to use one. I sure as heck didn't start really abusing it until I was comfortable and confident enough in my abilities to use it.

shepherd
08-07-2009, 06:41 PM
The first time I used one, it went a lot easier and faster than I expected. It seems to take longer now...

TMCNo1
08-07-2009, 06:51 PM
I just ram it as hard as I can and deal with the consequences later! A cost of a new BB is marginal by comparison.


Only if your single, the local bar has replacements.
If married, you just have to use it till it totally fails.:rolleyes:

TMCNo1
08-07-2009, 06:53 PM
The first time I used one, it went a lot easier and faster than I expected. It seems to take longer now...

So, it takes you all day to load, when you once could load it all day?

Hoosier Bob
08-07-2009, 06:53 PM
I agree! I think I was talking about my second time! Lol!:DThe first time I used one, it went a lot easier and faster than I expected. It seems to take longer now...

TMCNo1
08-07-2009, 06:57 PM
The first time I used one, it went a lot easier and faster than I expected. It seems to take longer now...

http://smileys.smileycentral.com/cat/36/36_19_2.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZSfox000)
I bet your BB tripped before you got loaded, right?

Hoosier Bob
08-07-2009, 07:02 PM
Premature Ejaculoading?:Dhttp://smileys.smileycentral.com/cat/36/36_19_2.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZSfox000)
I bet your BB tripped before you got loaded, right?

scott023
08-07-2009, 07:51 PM
Premature Ejaculoading?:D

Bob, I believe the correct term is ejaculaunching.

Hoosier Bob
08-07-2009, 08:03 PM
You use your Boat Buddy to launch? We need to talk!:DBob, I believe the correct term is ejaculaunching.

scott023
08-07-2009, 08:44 PM
You use your Boat Buddy to launch? We need to talk!:D

No no... this has nothing to do with the loading process Bob, the problem you were speaking of occurs during the launching process, not loading.

Hoosier Bob
08-07-2009, 08:51 PM
I think it has everything to do with loading!;)No no... this has nothing to do with the loading process Bob, the problem you were speaking of occurs during the launching process, not loading.

Swimmer
08-07-2009, 08:56 PM
Personally, I grease the pin and there's no problem sliding on in.

Hoosier Bob
08-07-2009, 09:27 PM
Just what color is your pin?:DPersonally, I grease the pin and there's no problem sliding on in.

scott023
08-07-2009, 09:43 PM
Personally, I grease the pin and there's no problem sliding on in.

Swimmer, if you were doing things properly, the buddy should already be greased and ready for the pin. Perhaps your routine before loading needs to be adjusted so better prepare the buddy for what's to come.

shepherd
08-07-2009, 11:04 PM
I think they should rename these things "boat *****es"

shepherd
08-07-2009, 11:17 PM
http://smileys.smileycentral.com/cat/36/36_19_2.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZSfox000)
I bet your BB tripped before you got loaded, right?

Yes. It can be quite embarrassing. And to top it off, it's really difficult to get the b!atch to open up again after it happens. :(

scott023
08-07-2009, 11:39 PM
Yes. It can be quite embarrassing. And to top it off, it's really difficult to get the b!atch to open up again after it happens. :(

Has anyone found a quick way to get it to open up quickly? I've talked nice to it, sworn at it... you name it, I've probably tried it.

shepherd
08-07-2009, 11:59 PM
Has anyone found a quick way to get it to open up quickly? I've talked nice to it, sworn at it... you name it, I've probably tried it.

I don't know. I think once that sucker trips before you get loaded, you really got to work on it for a while to get it to open back up.

bxroads
08-08-2009, 09:09 AM
When you're having to compensate, it's all in the angle.......

bxroads
08-08-2009, 09:13 AM
Shep, don't mean to threadjack, but its been nearly two weeks and my shoulder is still numb. I've not been able to ski one time since. It's depressing. I'm desparate as is evident by the Powervest I'm adjusting as we speak. Even though my shoulder is tingling and I can't lift my arm above the chest, I'm going to tighten down the staps of the vest and give it a go this afternoon.

scott023
08-08-2009, 09:28 AM
I don't know. I think once that sucker trips before you get loaded, you really got to work on it for a while to get it to open back up.

That's what I have found as well. There have been a couple times where I simply took the boat back out for some more runs before attempting to use the BB again. That strategy has worked well, I guess I was hoping someone had a quicker fix.

Hoosier Bob
08-08-2009, 10:31 AM
Any of you guys been out on the lake come in a bit late and get caught hitting someone else's Boat Buddy? Talk about pulling out quick! Sad part is your Boat Buddy always knows!:D

I have a special flag on mine now so this won't happen again!

scott023
08-08-2009, 01:18 PM
Any of you guys been out on the lake come in a bit late and get caught hitting someone else's Boat Buddy? Talk about pulling out quick! Sad part is your Boat Buddy always knows!:D

I have a special flag on mine now so this won't happen again!

Sounds similar to Funks earlier post, but he put s a specail platinum protective ring on his. I suppose he could use that to identify his buddy from the others as well. I haven't had this issue though Bob, as my hook eye is so big it would be nearly impossible to put it onto someone else'e trailer without my buddy knowing immediatly.

Swimmer
08-08-2009, 02:15 PM
Swimmer, if you were doing things properly, the buddy should already be greased and ready for the pin. Perhaps your routine before loading needs to be adjusted so better prepare the buddy for what's to come.

Just perhaps... I am the one that does the greasing of the main pin :D

Swimmer
08-08-2009, 02:18 PM
Just what color is your pin?:D

I'm not the owner of the pin HB.

Hoosier Bob
08-08-2009, 03:14 PM
Technically I think you are!:DI'm not the owner of the pin HB.

TX.X-30 fan
08-08-2009, 03:18 PM
Where is the Kuwaiti porn??

Hoosier Bob
08-08-2009, 03:27 PM
Freakin' Harold locked the site up again! He runs 5 or 6 computers at a time! I had to hit Basraporn.com! Not as good but they show more face!;) Where is the Kuwaiti porn??

TX.X-30 fan
08-08-2009, 03:39 PM
Try the "house of Al sabah" click harem then mecca. :D

Hoosier Bob
08-08-2009, 03:41 PM
PM me next time! Harold must be there too!:mad:Try the "house of Al sabah" click harem then mecca. :D

TX.X-30 fan
08-08-2009, 03:45 PM
PM me next time! Harold must be there too!:mad:

Never thought hair around the naval was sexy but wow. ;)

TMCNo1
08-08-2009, 03:54 PM
Never thought hair around the naval was sexy but wow. ;)

That wasn't me that locked anything up, I'm not a mod, must have been moderator atlamissedakey. I don't have the ability to do anything but wipe my ...................................screen!http://smileys.smileycentral.com/cat/10/10_4_6.gif (http://www.smileycentral.com/?partner=ZSzeb001_ZSfox000)

Hoosier Bob
08-08-2009, 03:55 PM
Mine or someone you saw on the site?:confused:8pNever thought hair around the naval was sexy but wow. ;)

TMCNo1
08-08-2009, 04:01 PM
Where is the Kuwaiti porn??

The only thing I could find was this Mid East orgy,
50317

TX.X-30 fan
08-08-2009, 04:02 PM
Keep it clean this is a family site!!!!!!!!

TMCNo1
08-08-2009, 04:12 PM
Keep it clean this is a family site!!!!!!!!

Oh yea baby,
50318

TX.X-30 fan
08-08-2009, 04:17 PM
She is cute.

TMCNo1
08-08-2009, 04:28 PM
She is cute.
"Yeh hai Youngistaan Meri Jaan!"
50319

TX.X-30 fan
08-08-2009, 05:15 PM
Talk to me Saeed?????????

scott023
08-08-2009, 05:38 PM
Thread jacking buggers. This thread is about the boat buddies.

Back on topic please.

shepherd
08-08-2009, 09:36 PM
How long is your pin? I think I read that 6" is standard. If I had a longer pin, would that be part of the problem?

TX.X-30 fan
08-08-2009, 09:59 PM
How long is your pin? I think I read that 6" is standard. If I had a longer pin, would that be part of the problem?





Well yea it would be if you had one. 8p


Boat buddy is a sensitive critter, pour a little white wine in/on her.

Hoosier Bob
08-08-2009, 10:31 PM
I think it is ok! Just make sure your buddy is equiped to handle it. Make sure yours is made in the USA or Greece. The Korean made BB's won't do! Too Bocu!;)How long is your pin? I think I read that 6" is standard. If I had a longer pin, would that be part of the problem?

scott023
08-08-2009, 11:03 PM
I think it is ok! Just make sure your buddy is equiped to handle it. Make sure yours is made in the USA or Greece. The Korean made BB's won't do! Too Bocu!;)

Actually Bob, insiders have told me that way to go now is American or Canadian.

Who am I to argue???

Hoosier Bob
08-08-2009, 11:04 PM
I remember the, almost forgot where I was! I will have to reply somewhere else!;)Actually Bob, insiders have told me that way to go now is American or Canadian.

Who am I to argue???

PA Prostar
08-14-2009, 01:30 PM
I got to wondering, are guys with new shiny boats compensating for a smaller buddy? As for me, I have a hard time even getting on the bunk to even give the buddy a chance. But what do you expect, I'm from PA - which is not one of the highly contributing states to the swimsuit thread.

Monte
08-14-2009, 02:58 PM
Does nobody else here smack the lower backside of the boat buddy while loading from behind?

kkkeating
08-14-2009, 03:17 PM
I’ve been thinking about getting another boat buddy as a spare in the event the primary one refuses to cooperate anymore. Is one spare enough or should I get more? Also, do the newer boat buddies have more features than the older ones? It would be nice to have different loading choices.

Hoosier Bob
08-14-2009, 03:20 PM
I hear a few on here will loan you their Boat Buddies! No need to buy another when you can borrow one whenever you need to!;)Iíve been thinking about getting another boat buddy as a spare in the event the primary one refuses to cooperate anymore. Is one spare enough or should I get more? Also, do the newer boat buddies have more features than the older ones? It would be nice to have different loading choices.

Monte
08-14-2009, 03:24 PM
I hear a few on here will loan you their Boat Buddies! No need to buy another when you can borrow one whenever you need to!;)

I would think a borrowed boat buddy could cause some problems. Especially if the loaner of the boat buddy needs to use it while you are loading. Probably better to go with an un attached boat buddy. But hey, I could be wrong.:rolleyes:

Monte
08-14-2009, 03:25 PM
Iíve been thinking about getting another boat buddy as a spare in the event the primary one refuses to cooperate anymore. Is one spare enough or should I get more? Also, do the newer boat buddies have more features than the older ones? It would be nice to have different loading choices.

Also remember boat buddies can become expensive. Especially if they find out you are using another boat buddy for loading..

TMCNo1
08-14-2009, 03:42 PM
I would think a borrowed boat buddy could cause some problems. Especially if the loaner of the boat buddy needs to use it while you are loading. Probably better to go with an un attached boat buddy. But hey, I could be wrong.:rolleyes:

I hear they have battery powered boat buddies now, just flip a switch and yer loaded!:rolleyes::D

flipper
08-14-2009, 03:43 PM
I don't know if I broke my boatbuddy or what. It seems to be leaking fluid and I have to add some every time I use it. Is this normal?

Monte
08-14-2009, 03:46 PM
I hear they have battery powered boat buddies now, just flip a switch and yer loaded!:rolleyes::D

Eh.. I bet those things are expensive. If it gets to THAT point I guess it is time to crank it in by hand:rolleyes:

TMCNo1
08-14-2009, 03:47 PM
I don't know if I broke my boatbuddy or what. It seems to be leaking fluid and I have to add some every time I use it. Is this normal?


What bothers me more is a tight steering cable!:rolleyes::D

Monte
08-14-2009, 03:49 PM
I don't know if I broke my boatbuddy or what. It seems to be leaking fluid and I have to add some every time I use it. Is this normal?

Making sure the fluid levels are at an optimal level is always a good practice. A little over optimal certaily cannot hurt.

PA Prostar
08-14-2009, 03:54 PM
"Does nobody else here smack the lower backside of the boat buddy while loading from behind?"

Don't you mean the ramp? I've smacked that, but never the buddy.

Sometimes my legs are sore and it's hard to walk after a good load though.

kkkeating
08-14-2009, 04:01 PM
I don't know if I broke my boatbuddy or what. It seems to be leaking fluid and I have to add some every time I use it. Is this normal?

It depends; if it's leaking before you use it may have been loaned out without your knowledge. I know people are always trying to borrow my boat buddy without me knowing but when they find out the kids come with it they always change their mind.

Monte
08-14-2009, 04:14 PM
"Does nobody else here smack the lower backside of the boat buddy while loading from behind?"

Don't you mean the ramp? I've smacked that, but never the buddy.

Sometimes my legs are sore and it's hard to walk after a good load though.

Yes, the ramp is what I was speaking of smacking. But I was considering the boat buddy as a whole:rolleyes:

PA Prostar
08-14-2009, 04:17 PM
That's fine. I just didn't know if I was learning something...............

shepherd
08-14-2009, 04:48 PM
Does nobody else here smack the lower backside of the boat buddy while loading from behind?

Oh yeah... I've definitely left some marks on my boat buddy from smacking it too hard. It can take it though. Those things are pretty durable, though they tend to be very temperamental.

shepherd
08-14-2009, 04:50 PM
I would think a borrowed boat buddy could cause some problems. Especially if the loaner of the boat buddy needs to use it while you are loading. Probably better to go with an un attached boat buddy. But hey, I could be wrong.:rolleyes:

It's not a problem actually. As long as you have the right tool, it's easy. But I agree that going with one that is already unattached is easier and safer to work with.

Hoosier Bob
08-14-2009, 05:16 PM
Ha, no one will read this thread now! Modded!;)

shepherd
08-14-2009, 05:43 PM
Ha, no one will read this thread now! Modded!;)

Lol!

Wait, I didn't know you were a mod. :confused: ;)

Over 1700 views. I guess we proved skeeler's point.

Hoosier Bob
08-14-2009, 06:49 PM
I look forward to your full report!;)Lol!

Wait, I didn't know you were a mod. :confused: ;)

Over 1700 views. I guess we proved skeeler's point.

shepherd
08-14-2009, 06:56 PM
I look forward to your full report!;)

Report attached: VVVVV

Question posed: Why do so many people view the sex spams?

Hypothesis: Because they have the word SEX in them.

Methodology:

Step 1: Create a bogus thread with the title

BOAT BUDDY SEX ISN'T WORKING

Step 2: Record the number of hits on the thread.

Result: Hypothesis verified.

Hoosier Bob
08-14-2009, 07:21 PM
Nice job! Now to test your hypothesis and results begin a thread such as Boat Buddy Cash Rewards Broken! You need to be sure!:D

PS You may want to substitute SOL for the word broken! Lol!Report attached: VVVVV

Question posed: Why do so many people view the sex spams?

Hypothesis: Because they have the word SEX in them.

Methodology:

Step 1: Create a bogus thread with the title

BOAT BUDDY SEX ISN'T WORKING

Step 2: Record the number of hits on the thread.

Result: Hypothesis verified.

Monte
08-14-2009, 08:36 PM
Just wait til some unsuspecting soal really needs help with their boat buddy..:noface:

Hammer
08-14-2009, 08:37 PM
Nice job! Now to test your hypothesis and results begin a thread such as Boat Buddy Cash Rewards Broken! You need to be sure!:D

PS You may want to substitute SOL for the word broken! Lol!

Unfortunately this method will not work. Sure fire way to have a thread deleted is to mention "CR". Therefor this methodology is flawed and must be revised.:rolleyes:

shepherd
08-14-2009, 08:52 PM
Unfortunately this method will not work. Sure fire way to have a thread deleted is to mention "CR". Therefor this methodology is flawed and must be revised.:rolleyes:

Agreed. How about a "303 Won't SEX Polish My Knob" thread?

Hammer
08-14-2009, 08:55 PM
Agreed. How about a "303 Won't SEX Polish My Knob" thread?

Now that might just work.

Hoosier Bob
08-14-2009, 09:56 PM
How about Monetary Benefits?;)Unfortunately this method will not work. Sure fire way to have a thread deleted is to mention "CR". Therefor this methodology is flawed and must be revised.:rolleyes:

Hammer
08-14-2009, 10:25 PM
How about Monetary Benefits?;)

Now we are on to something. We should proceed with the test.

shepherd
04-10-2014, 01:29 PM
Hmmm, seems like the problem worked itself out. Maybe because I'm not using it as much as I used to... Thanks to all for your suggestions. :)