PDA

View Full Version : Mastercraft Bling


Bert
07-30-2009, 01:39 PM
Does any one know what is available for the older prostar models? Looking for things to dress one up with. Throttle knobs, exhaust covers etc. Looking at TMC1's gallery he must know where to get this stuff.:D

east tx skier
07-30-2009, 01:48 PM
Try www.mymastercraft.com. I think you get some of the throttle knob stuff at skidim, too.

TMCNo1
07-30-2009, 02:44 PM
I have my sources, but knobs can be found here, http://www.skidim.com/products.asp?dept=1122, exhaust are the ordinary flappers with homemade polished s/s covers, rudder is MasterCraft by Design sold by most dealers and installed myself along with most everything else.

SkiDog
07-30-2009, 06:00 PM
I have my sources, but knobs can be found here, http://www.skidim.com/products.asp?dept=1122, exhaust are the ordinary flappers with homemade polished s/s covers, rudder is MasterCraft by Design sold by most dealers and installed myself along with most everything else.

Any of the stuff you see on #1's boat can be found at most reputable junk yards!:D:D:D

flipper
07-30-2009, 06:02 PM
Any of the stuff you see on #1's boat can be found at most reputable junk yards!:D:D:D


50027

500285002850028

SkiDog
07-30-2009, 06:06 PM
50027

500285002850028

I hope he's the sport everybody thinks he is!:D

flipper
07-30-2009, 06:21 PM
We'll soon find out

TMCNo1
07-30-2009, 08:10 PM
We'll soon find out

Junk yards, freight salvage stores, MasterCraft Outlet Center, Ace Hardware, Shoppers Paradise, Goodwill and Fast Finger Fernando's Midnight Discount Auto Parts and Satellite Dish Emporium.:rolleyes::D

trunderw
07-30-2009, 10:53 PM
I think decals are good for bling and 5hp per...

damaged442
07-30-2009, 11:28 PM
Junk yards, freight salvage stores, MasterCraft Outlet Center, Ace Hardware, Shoppers Paradise, Goodwill and Fast Finger Fernando's Midnight Discount Auto Parts and Satellite Dish Emporium.:rolleyes::D

...and Waffle House!

JohnE
07-30-2009, 11:51 PM
Junk yards, freight salvage stores, MasterCraft Outlet Center, Ace Hardware, Shoppers Paradise, Goodwill and Fast Finger Fernando's Midnight Discount Auto Parts and Satellite Dish Emporium.:rolleyes::D

And bay area watersports?.....:D

jasonba1
07-31-2009, 04:33 PM
viper customs can make whatever you want if he doesnt have it in stock

Jim@BAWS
08-03-2009, 03:25 PM
And bay area watersports?.....:D


You guys nust have met at the Waffle House...Please capitalize as necessary

www.bayareawatersports.com

Bay Area WaterSports

Here is SOME stuff for BLING BLING

http://www.mastercraft.com/market/showproduct.php?product=1884&cat=13

Jim@BAWS
08-03-2009, 03:25 PM
BLING BLING BLING

http://www.mastercraft.com/market/showproduct.php?product=1884&cat=13

Tomgofly
08-28-2009, 05:22 PM
Hi!

I just got my Tristar 190 2 days ago (very much a project boat). I am really excited as I thought the Trans was going to be toast before I bought it, but I paid for it anyway. Turns out the Trans is just fine! I'm very pleased, Happy Birthday to me!!!

Anyway, I have made a few of these for my friends Nautique who I have been bummin rides off of, but now that I have my own boat... Well, it was the first upgrade for mine, even before I got it in the water.

They are turned on a lathe and finished and polished by hand. The wood ones can be made with exotic woods such as Amboyna Burl (my favorite), Bethlehem Olive Wood, Spalted Maple, etc. The colored ones are made from a poly resin and have a bowling ball look to them. I can make them in just about any colors. Also, I have my hands on a laser engraver and can put anything on em you want. For the amount of time involved with them, I could let em go for about $40, unless it is a hard to get exotic wood.

The first picture has his old knob from his Nautique 2001 on the left and my old knob off my 1979 TriStar on the far right for size comparison. I have to admit they do fit VERY nicely in the hand.

What do you guys think?

SkiDog
08-28-2009, 05:50 PM
Hi!

I just got my Tristar 190 2 days ago (very much a project boat). I am really excited as I thought the Trans was going to be toast before I bought it, but I paid for it anyway. Turns out the Trans is just fine! I'm very pleased, Happy Birthday to me!!!

Anyway, I have made a few of these for my friends Nautique who I have been bummin rides off of, but now that I have my own boat... Well, it was the first upgrade for mine, even before I got it in the water.

They are turned on a lathe and finished and polished by hand. The wood ones can be made with exotic woods such as Amboyna Burl (my favorite), Bethlehem Olive Wood, Spalted Maple, etc. The colored ones are made from a poly resin and have a bowling ball look to them. I can make them in just about any colors. Also, I have my hands on a laser engraver and can put anything on em you want. For the amount of time involved with them, I could let em go for about $40, unless it is a hard to get exotic wood.

The first picture has his old knob from his Nautique 2001 on the left and my old knob off my 1979 TriStar on the far right for size comparison. I have to admit they do fit VERY nicely in the hand.

What do you guys think?

WOW, those are beauties!

Tomgofly
08-29-2009, 12:04 AM
Thanks!

Unfortunately, I still have carpet, vinyl, dash panel, paint job, trailer paint job, engine tuneup, rewire everything,....etc...

whew...

But, it will be worth it. I took the family out yesterday and we all had a blast. Oh, and it pulls a wake board too!!! :)

-=Tom=-

DemolitionMan
09-09-2009, 10:10 PM
Engine parts came from skidim.com. Grills a friend made for me. I made the prop guard with roller brackets, and then took a sheet stainless steel and polished it. The tag was a dodge ram logo that I removed and replaced with the mc logo.

DemolitionMan
09-09-2009, 10:34 PM
A few more.

DemolitionMan
09-09-2009, 10:42 PM
Last ones.

Sodar
09-09-2009, 11:55 PM
Your boat was the boat that waterski mag followed the restoration on, huh?

DemolitionMan
09-10-2009, 12:44 AM
That would be correct.

TMCNo1
09-10-2009, 07:42 AM
Dang, looks like Mr.M-M has a picher postin' protege!

CantRepeat
09-10-2009, 07:46 AM
That would be correct.


Very, very nice.

CantRepeat
09-10-2009, 07:51 AM
Dang, looks like Mr.M-M has a picher postin' protege!

Not even close. These are worth the band width to see.

Tomgofly
09-10-2009, 09:28 AM
WAaaaay over the top bling dude!

I especially like the "mirrored" prop guard so you can check out your smoking prop setup.

Rock on!

-=Tom=-

DemolitionMan
09-10-2009, 09:44 AM
Well last night it was raining and there was nothing on T.V. so I just started posting.

TMCNo1
09-10-2009, 09:50 AM
Well last night it was raining and there was nothing on T.V. so I just started posting.


I understand, cause Osama was making his TV pitch for heath care and I needed something to do too.
Besides, you've done all that work on the boat and now there is no longer a way to show it off, so post on!

DemolitionMan
09-10-2009, 09:53 AM
I understand, cause Osama was making his TV pitch for heath care and I needed something to do too.
Besides, you've done all that work on the boat and now there is no longer a way to show it off, so post on!

I was thinking about getting all of the reunion photos together and posting them in the future.

DemolitionMan
09-13-2009, 12:44 AM
Found some more.

ProStar200
09-13-2009, 11:56 PM
Great job on the restoration. Would like to see some before and after photos.

1986mastercraftwindermerewakeboarder
10-13-2009, 04:46 PM
wow any ideas where to get teak back board???

TMCNo1
10-13-2009, 05:39 PM
wow any ideas where to get teak back board???

If your referring to a teak swim platform, http://teakworldenterprises.samsbiz.com/