PDA

View Full Version : What are the normal dashboard readings supposed to be?


Lopers22
07-02-2009, 11:22 AM
I have a 2007 X-2, when you are on the water, what should the normal readings be for voltage, oil pressure, temp ...etc?

Jim@BAWS
07-02-2009, 11:24 AM
I have a 2007 X-2, when you are on the water, what should the normal readings be for voltage, oil pressure, temp ...etc?


13.5-14.2 volts
160/165 degress
Oil pressure will vary w/ RPMs

Jim@BAWS

bigmac
07-02-2009, 11:28 AM
I have a 2007 X-2, when you are on the water, what should the normal readings be for voltage, oil pressure, temp ...etc?

If voltage or oil pressure are too low, your boat will tell you.

My oil pressure varies between 40-80 psi, depending on RPM. Voltage...probably around 13.4 minimum. Temp....it's a 160 degree thermostat. If it runs higher than that, you likely have weeds in your transmission cooler, or a couple of missing vanes on your raw water pump impeller. My temp is 160 degrees +/- 5 degrees.