PDA

View Full Version : 82 Stars and Stripes flywheel


NoMoreBeggin MC
06-28-2009, 12:14 AM
Anybody help me out with finding one. I have a 351 with a Borg 1:1.5 tranny.

The teeth on my old one are kinda rough. Can you just put new teeth on the old one?

TMCNo1
06-28-2009, 01:38 AM
Anybody help me out with finding one. I have a 351 with a Borg 1:1.5 tranny.

The teeth on my old one are kinda rough. Can you just put new teeth on the old one?

Most any MC dealer, auto parts store, or here, http://www.skidim.com/prodinfo.asp?number=R139006

Jim@BAWS
06-28-2009, 09:25 AM
You may not need an entire fly wheel. Just the ring gear

If I can be of help let me know

Jim@BAWS

jim.baws@verizon.net

(813) 996 2297

Thanks

dmminfla
06-28-2009, 09:44 AM
I changed my ring gear on my 351 a few months ago, I bought it at the local NAPA outo parts store. Tell the clerk you want a ring gear for an 80's mustang 5.0 L. That will be the 157 tooth ring gear for the 12 inch flywheel. The 351 5.7L ford engins in the trucks and bronco's used bigger 164 tooth flywheel. I paid $25.00 for the ring gear. Take the old flywheel to a local machine shop, it has to be heated and pressed on. My machine shop charged me $30.00 and it took about 10 minutes,


I found the link with part number

http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=BK&PartNumber=6003030&Description=Flywheel+Gear

NoMoreBeggin MC
06-29-2009, 11:40 PM
Thanks a lot guys. Napa had it delivered and pressed it on at their machine shop. Took 15 minutes, and only 45 bucks out the door.

Appreciate the advice