PDA

View Full Version : Smart Timer Position


franciscolalas
06-26-2009, 02:53 PM
Hi, I own a 1992 Prostar 190 and I'm not able to catch all the magnet signals on my course. Can anyone tell me which is the best location to put the smart timer sensor.

Regards

Francisco

mark g
06-26-2009, 03:09 PM
i have mine under the passenger seat as close to the edge and side of hull as possible, check the depth of the magnets we did have an issue with them so we raised the magnets.
seems to be ok now

ProStar Slalom
06-26-2009, 04:03 PM
i have mine under the passenger seat as close to the edge and side of hull as possible, check the depth of the magnets we did have an issue with them so we raised the magnets.
seems to be ok now


Same spot for me....probably your magnets as suggested.

franciscolalas
06-26-2009, 07:10 PM
Thanks guys, I will try that location. Did you fixed it directly to the carpet? Horizontally or on the side of the hull?

Regards

ProStar Slalom
06-26-2009, 07:37 PM
Thanks guys, I will try that location. Did you fixed it directly to the carpet? Horizontally or on the side of the hull?

Regards

The velcro on the back should stick it to the carpet good enough...it can lie flat or along the edge; will pick-up either way.

André
06-27-2009, 09:13 AM
Also...
-Arrow pointing forward
-Magnets North side up
-There's a magnet test mode in the menu of PP.Try it as indicated in the user manual...

Good luck and good ski!:)