PDA

View Full Version : RPM and prop question


Scott
06-23-2009, 08:53 AM
I have a 03 TT LQ9 with a 14x20 4 bladed prop. Boat runs 4600 to 4700 RPMS. Is this a Problem?? The boat doesnt seem very strong on take off, either.. The tranny is NOT the 1:1.. any suggestions??

EJ OJPROP
06-23-2009, 09:16 AM
Has the prop been repaired?

Scott
06-23-2009, 11:29 AM
no. its never been damaged before..

EJ OJPROP
06-23-2009, 11:32 AM
Give me a call if you can. Eric - 800-359-9730

corey
06-23-2009, 12:07 PM
Could be the prop or it could need a tune up. I've seen some of the 6.0L engines run similar to yours with a bad plug and/or wire.

brucemac
06-23-2009, 01:01 PM
hey eric, thanks for the T's!!!! :D

bturner2
06-23-2009, 01:38 PM
Eric,
Thanks for all the help with the prop and getting it out the door so quickly. Yet another happy OJ customer!

EJ OJPROP
06-23-2009, 02:41 PM
hey eric, thanks for the T's!!!! :D

Thanks for wanting to wear one!

EJ OJPROP
06-23-2009, 02:42 PM
Eric,
Thanks for all the help with the prop and getting it out the door so quickly. Yet another happy OJ customer!

Thank you. EJ