PDA

View Full Version : drivers seat stuck....


jixxxer
06-02-2009, 01:57 PM
Ok, heres another issue; the drivers seat is stuck in the all the way back position...seems to be because the metals guides are rusted thus not allowing seat to slide back and forth. So what will I need to fix this? Those metal guides?...can u purchase those things or will it have to be an all together type of thing? I noticed those guides that the seat is attached to, sits on top of a square plastic deal that is attached to the floor.

ProStar Slalom
06-02-2009, 04:16 PM
The metal guides are attached to the square plastic base with four screws. If you can get a screwdriver on them, remove the screws and take the entire seat out. You should then be able to clean up and lube the metal guides.

jixxxer
06-02-2009, 04:40 PM
ah, good idea.........i have a bad feeling it wont be easy!

TMCNo1
06-02-2009, 04:44 PM
Another guy asked the same question and got a decent answer, http://www.mastercraft.com/teamtalk/showthread.php?t=29346, someone got a track from a MC dealer.

jixxxer
06-02-2009, 05:20 PM
LOL...good find, I forgot i posted about it..........so much going on lately.

Commandohorn
06-03-2009, 12:06 PM
Spray some PB Blaster on them and let it soak in a few minutes, That should free them up enough to move.

WTRSK1R
06-08-2009, 09:37 PM
The big challenge you may have is you need to move the seat to get access to the mounting bolts where it attaches to the floor. If the seat is completely stuck you may not be able to get it out to work on it.

Good luck.

jixxxer
06-08-2009, 09:39 PM
sprayed on some pb blaster and it works fine.....Thanks!!