PDA

View Full Version : Heatercraft heater


Justjoe
03-28-2009, 11:25 PM
Ok, so I'm seriously thinking about pulling the two vent heatercraft heater out, and replacing it with a three vent system. The two vent system works GREAT, so a three would be EVEN BETTER!!! I'm thinking another hot tube...perhaps in the bow seating area. So the question is can I just get the three vent core (and of course another hot tube)?? Or do I have to invest in something more than that?

Witness140
03-28-2009, 11:43 PM
The 200H 2 vent core has a single fan setup. The 300H 3 vent core has a dual fan setup.

Here is the fan in your current setup.

http://www.heatercraft.com/ProductInfo.aspx?productid=H207

Here is the fan that comes with the bigger 3 vent setup that you want.

http://www.heatercraft.com/ProductInfo.aspx?productid=H304

In addition to the core (found here)

http://www.heatercraft.com/ProductInfo.aspx?productid=H301

you would need the case

http://www.heatercraft.com/ProductInfo.aspx?productid=3H30CW

and maybe a longer bracket because now the case is longer. Not sure what boat you have. I know that if I did this in my 197 (heater under observer seat) one end was probably going to need the longer bracket.

http://www.heatercraft.com/ProductInfo.aspx?productid=H201XL

Justjoe
03-29-2009, 05:33 AM
Cool, thanks!! This is for the X2.