PDA

View Full Version : anybody who can help with a measurement? 2002-2004 X-2/205V with ZF tower


brucemac
01-30-2009, 08:15 PM
hi gang, looking to see if anybody can help with a measurement. tried searching, but came up empty handed.

looking for the distance between the floor and the bottom of the tower (in the middle) on a 2002-2004 X-2, 205V with the zero flex flyer tower.

my boats here, but i can't put the tower up in my garage and it's nasty outside. thanks in advance if you can help out, or know the answer.

mccobmd
01-31-2009, 10:01 AM
Sorry, I'm in the same situation, can't get the tower up. Where are all the Florida boys when you need them??

TOO-TALL
01-31-2009, 10:43 PM
Wish I could help ya out Bro.....But the trailer/boat is in the garage up on Blocks for winter storage.

brucemac
02-01-2009, 11:47 AM
hey no worries, thanks guys. i'll have to pull her out i guess.

mallees
02-01-2009, 04:49 PM
If you can wait a couple days, I have something on tonight, but I will be able to pull the cover off my 04 X2 and measure for you tomorrow night.

brucemac
02-01-2009, 05:19 PM
hey, that would be awesome, thanks a ton, I can wait!

mallees
02-04-2009, 04:27 PM
Hey Brucemac, I measured from the top of the access hatch to the underside of the tow hitch (lowest point on tower) 6'11"
Hope this helps.

brucemac
02-04-2009, 04:46 PM
Hey Brucemac, I measured from the top of the access hatch to the underside of the tow hitch (lowest point on tower) 6'11"
Hope this helps.

Hey, thanks so much!!! That's super helpful. That explains why my 6ft 5in buddy remembers never having to duck!

Again, much appreciated!!! Again, that's really helpful!