PDA

View Full Version : Dimensions for newer prop guard


babymoore3
11-29-2008, 03:31 PM
Can someone take some pics and post the dimensions of the steel and lengths of the prop guard? I deal with the grinding of the guard to the road and have the old 1/8 inch x 3 inch "sheet metal" guard. Really like the look of the channel and rollers on the newer trailers but need some help getting there. Yes I understand your trailer and mine are different but looking for a place to start....

dichdoc
11-30-2008, 03:25 PM
Here's a pic of my 84 with an added prop guard I thought I had a CAD file of it here at work but don't I may have just engineered it on the fly. I'll grab some measurements on Tuesday if it's close to what you need. It has one roller in the middle and two pads on either side. I believe it's 2" channel the pads are 1/4" x3" flat and the roller I made by boring out some 1" round bar and simply bolting it through. I think I bent the back bar with a cheap *** pipe bender can't remember if I did relief cuts or not? Let me know and feel free to PM me. Travis