View Full Version : Transmission Modification
05-10-2005, 10:29 AM
Can you modify an exsiting 2002 LTR engine with the 1:1 ratio into a powerslot transmission? What exactly will this give me? More power out of the hole? If it can be done, how much would it run in cost?
05-10-2005, 10:37 AM
What are you trying to achieve ?
From my knowledge (limited) you cannot modify the transmission but you could swap it out for a powerslot but that would involve changing your prop shaft, coupling, strut and prop as well.
If you are looking for more hole shot try changing your prop first.
east tx skier
05-10-2005, 10:42 AM
Yup, like Dan said. Start at the prop and change everything all the way forward (stop at the engine).
Are you pulling pyramids or something. What's the hp of the LTR?
05-10-2005, 10:47 AM
Depending on if you drive at WOT or not you could go down with the pitch of the prop and pickup low end. At WOT your RPM's could go to high. no bueno