PDA

View Full Version : '06 X2 Manifold Drain Plugs 310 RTP


Garycoral
11-03-2008, 09:47 PM
Can someone tell me where to find the manifold drain plugs on an '06 RTP? I've disconnected the hoses and pulled block drain plugs but can't find any plugs on the manifolds.

Also I can't find any knock sensor - Does this motor have one?
Thanks!

bturner2
11-04-2008, 08:55 AM
I believe this motor hasn't changed from my 03. The exhaust manifold drain plugs have been replaced with the hose (thank you for small wonders). The knock sensor is on the left side (passenger side) of the engine. It has a wire with a connector that plugs in on top of it and is installed in place of a drain plug on that side of the engine.

east tx skier
11-04-2008, 02:47 PM
Manifold plugs are 3/4" NPT. Block plugs are 1/4" NPT. Available at NAPA and elsehwere.

ttu
11-04-2008, 02:53 PM
Can someone tell me where to find the manifold drain plugs on an '06 RTP? I've disconnected the hoses and pulled block drain plugs but can't find any plugs on the manifolds.

Also I can't find any knock sensor - Does this motor have one?
Thanks!


my 07 x2 with the 310 rtp did not have a knock sensor.

east tx skier
11-04-2008, 10:32 PM
No knock sensor on the starboard side block drain plug?

ttu
11-04-2008, 11:21 PM
doug, i sent larry (engine nut) after i winterized and he said no knock sensors on the rtp.

http://www.mastercraft.com/teamtalk/private.php?do=showpm&pmid=188382

duramaxer
11-06-2008, 11:28 AM
My 08 didn't have a knock sensor either.
Just 2 brass plugs on either side of the block.
Looked the same on both sides.
Ya and the manifolds drain by undoing the hoses where they connect together at the front side of the engine. Just trace the black hose coming from the manifolds forward and there will be a screw connection that you undo.