PDA

View Full Version : changing from big trash can muffler to bullets- need help


DooSPX
09-27-2008, 11:11 PM
on my 91 PS 190, the big 2-1-2 muffler sprung a leak again, and i am not fixing it again. I ordered two bullet mufflers from overtons. but I need to know how to make the bend in from the manifold to between the stringers where the exhaust lays. It seems to me that the exhaust hose is too stiff to bend in and straight again.
anyone have any ideas? Please help!

thanks

TMCNo1
09-27-2008, 11:23 PM
You could have always bought the ones here, http://www.skidim.com/prodinfo.asp?number=NPNMS-030-1000, 40690

Cloaked
09-27-2008, 11:32 PM
on my 91 PS 190, the big 2-1-2 muffler sprung a leak again, and i am not fixing it again. I ordered two bullet mufflers from overtons. but I need to know how to make the bend in from the manifold to between the stringers where the exhaust lays. It seems to me that the exhaust hose is too stiff to bend in and straight again.
anyone have any ideas? Please help!

thanksRefuse the delivery when it gets to your house. Send them back. Call Skidim, like #1 said.

TMCNo1
09-27-2008, 11:40 PM
Or you could order some of this, 40691, http://www.skidim.com/prodinfo.asp?number=MPI252-3000, for the bend from the manifold to the muffler, then use the existing hose to the thru hull fitting using 4 more clamps and may another pair of hangers.

DooSPX
09-28-2008, 01:13 PM
already have them.... guess i can get the flex hose