PDA

View Full Version : Mastercraft Trailer Grip Tape


JDH88
09-04-2008, 11:05 PM
I have a 94 MC Prostar 190 with the factory trailer. I would like to replace the grip tape on the fenders. This model has the MC emblem cut out of the gtip tape on the rear of the fender, a small square on top of the wheel well and another small square on the front part of the fender. Does anyone know if these can still be purchased and from whom?

JDH88

OHIOPRO205
09-04-2008, 11:10 PM
I also have a 94 Prostar 205 with factory single axle trailer. I am looking for the same thing.

east tx skier
09-04-2008, 11:37 PM
I bought replacements from a MasterCraft dealer. Pretty reasonably priced IIRC. Not a 100% match, but close enough (or just buy a set and replace both).

JDH88
09-04-2008, 11:49 PM
Thanks! I believe there is a member who posts often and works for Chicago Mastercraft? Maybe he has the hook up. My brakes have also stopped working. I have read some of the threads on the trailer brakes and hope by replacing the actuator it will eliminate the 3-6 inches of slack that allows the boat to slam forward when the truck brakes are applied.

wsrobert
09-09-2008, 02:55 PM
Do you guys have any pics???

WTRSK1R
09-11-2008, 09:05 PM
The 9 x 21 anti-skid sticker with MC cut out of it was part #75-8557 when I replaced mine from a 1992 205 single axel trailer. Not sure if the part number will still work, but it is worth a try. I bought it back in 10/97.

Steve