PDA

View Full Version : Wiring to Coil Pack on Indmar 351


Ron00
07-10-2008, 02:56 PM
I have a 1992 Prostar 205 with the Indmar 351 Windsor motor. My wires were disconnected from my coil pack and I need to get them reconnected in the right order. I have a purple and gray wire from the wiring harness. The purple wire continues to the choke on the Carb. I also have two wires coing out of the bottom of the cap and rotor. Could any body give me the correct wiring sequence or a diagram of the wiring. Thanks.

TMCNo1
07-10-2008, 03:38 PM
Diagrams in this thread may help, http://www.tmcowners.com/teamtalk/showthread.php?t=21247

denverd1
07-10-2008, 04:06 PM
the pos and neg wire straight to the pos/neg on distributor. then purp on pos, gray on neg.

Ron00
07-10-2008, 08:14 PM
Thank you for your help with that.