PDA

View Full Version : Removeing Prop


gguppy
04-30-2008, 08:32 PM
Why do you have to remove the prop for the winter.Next thing i broke the exhaust drain plug, how do i get out.

coz
04-30-2008, 08:44 PM
Why do you have to remove the prop for the winter.Next thing i broke the exhaust drain plug, how do i get out.

Winter's over :rolleyes: are you saying you just went out and forgot to put it back on??? :confused:

TMCNo1
04-30-2008, 08:48 PM
Why do you have to remove the prop for the winter.Next thing i broke the exhaust drain plug, how do i get out.


I have no idea why anyone would remove the prop over the winter, except to have it repaired if damaged!
Have you tried a EZ-Out to remove the plug?

trickskier
04-30-2008, 08:53 PM
They come off???:confused:

Willski
04-30-2008, 08:54 PM
Why do you have to remove the prop for the winter.Next thing i broke the exhaust drain plug, how do i get out.

Don't know why you would remove your prop.

As far as the drain plug, I'm not sure what your's looks like, but can you use an EZ out? Othewise, you may have to drill it out to a think wall and break it? Put a picture on here and you'll get some additional help.

VTJC
04-30-2008, 09:22 PM
Might remove prop so it isn't stolen, depending on security of your storage. With metal prices going so high, it probably worth a fair amount even for just scrap!

gguppy
04-30-2008, 09:26 PM
service manuel say so

gguppy
04-30-2008, 09:28 PM
Thanks i will try a eazy out

gguppy
04-30-2008, 09:29 PM
will try EZ out thanks

TMCNo1
04-30-2008, 09:32 PM
service manuel say so

Looks like I'm going to hell with my eyes wide open!:firejump: I had one on for ten years another one for three and the one on now has been on for four.:o :(

trickskier
04-30-2008, 09:33 PM
service manuel say so
Manual??? :confused:

trickskier
04-30-2008, 09:48 PM
Looks like I'm going to hell with my eyes wide open!:firejump: I had one on for ten years another one for three and the one on now has been on for four.:o :(
Sounds to me like you've VOIDED your warranty..................8p

uawaterskier
04-30-2008, 10:13 PM
well my only guess would be they recommend it it so it doesn't get seized to the shaft over the years? Not that really makes any sense because a BFH will usually get it off.