PDA

View Full Version : Help on lower belt pulley removal!


fintek9
04-20-2008, 05:51 PM
OK peeps, I need some help here. The last to come off the old motor is this lower pulley. The 3 hex bolts have been removed holding it to the harmonic balancer, I can't get ahold of my motorhead buddy and nothing on line about this.

So am I going about this the wrong way? it won't budge, heat, hammer, rust spray...nothing, It just won't play (pry off ) right.

To me it seems I'm pulling it against itself, Doesn't the c-pump shaft and pulley are as one? if so how can one get this to come out of the insert hole in the h-balancer itself?

NOTE: the second bearing for the pump is off the shaft now!

Thanks much cause this is my 2nd day trying to get this off, It shouldn't be this hard!

fintek9
04-20-2008, 05:52 PM
...........................................

fintek9
04-21-2008, 07:29 PM
I figured it out! Thanks

Sodar
04-21-2008, 07:33 PM
So, you got it?

fintek9
04-21-2008, 07:57 PM
Yep! It was all "froze" together from all the corrosion built up between the pulley and the pump bracket!! I knew it had to be something simple but then again you never know, Twas a bitc........bugger thou:rolleyes:

NO PULLEY INVOLVED IN THIS PROCESS PEOPLE!!!!