PDA

View Full Version : Pictures of trailers needed


Monte
04-17-2008, 11:02 AM
I am going to have a welder reinstall a prop guard. I need something to show him to get him started. Any angles I can get I need. He is also going to install the boat buddy (thanks JohnE) using the plans Tmcno1 sent me to re work the crank stand. I'd also like to get some pictures of those. (crank stand) Your help will be greatly appreciated..

TMCNo1
04-17-2008, 11:21 AM
I wish I had the dimensions and angles for your TriSrtar trailer propguard, but I will e-mail you my trailer album so you can see the setup, but here is one of the Boat Buddy/winch stand and it too will be in the album,
33781

P-hat_in_Cincy
04-17-2008, 11:24 AM
I can't throw any angles at you, but here's a picture for a '04 DA 205V trailer.

I've got the bigger picture if you need it emailed to you.

Take care,
Paul

coz
04-17-2008, 11:31 AM
Click the pics for full size
http://farm3.static.flickr.com/2241/2421339134_bccaf0152e_b.jpg
http://farm3.static.flickr.com/2346/2420523921_0bc39651e1_b.jpg
http://farm4.static.flickr.com/3055/2421338480_91bace3fe7_b.jpg
http://farm3.static.flickr.com/2316/2421338146_72bd3389c9_o.jpg

Hope that helps

123src
04-17-2008, 11:34 AM
Here is a picture of mine if it helps!

123src
04-17-2008, 11:35 AM
and a close up the roller...

russlars
04-17-2008, 11:37 AM
You probably have enough pics, but here is another. I will soon be adding wheels to mine. You might consider having your welder add some of those at the same time. If you need a link to purchase weld on wheels, let me know.

Sodar
04-17-2008, 11:43 AM
Mine

33786

33787

33788

33789

coz
04-17-2008, 11:43 AM
Man! some of those seem low :confused: what kinf of ground clearance do you have? mine's not an MC trailer it's a VIP and I have 9+ inches to the ground.

Monte
04-17-2008, 11:45 AM
Thanks folks Exactly what I need.. Keep em coming.. By angles I meant photo angles.. whoops I guess that came out wrong..

east tx skier
04-17-2008, 11:51 AM
Here are a couple.

http://i82.photobucket.com/albums/j262/dnortonames/Propguardandrollers.jpg

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/Homecoming1.jpg

russlars
04-17-2008, 11:56 AM
Man! some of those seem low :confused: what kinf of ground clearance do you have? mine's not an MC trailer it's a VIP and I have 9+ inches to the ground.
That's exactly why I am putting wheels on mine!

russlars
04-17-2008, 12:02 PM
Sodar. Looks like a tight fit in that garage! No opening the pasenger door on that car. Does your wife really tolerate the boat that close to the washing machine?:rolleyes:

wakeX2wake
04-17-2008, 12:02 PM
the wheels can save you a LOT of trailer

Sodar
04-17-2008, 12:20 PM
Sodar. Looks like a tight fit in that garage! No opening the pasenger door on that car. Does your wife really tolerate the boat that close to the washing machine?:rolleyes:

It was a tight fit, but the boat would only be there a couple weeks out of the year. This pictures was actually taken in my parents garage and the boat is in the spot where my parent's Suburban normally goes. Living in SoCal, space is at a premium and so is garage space! :D When both of my parents' cars are in the garage, only the drivers can get into the car. The suburban gets backed in and the mercedes goes in forward.... it works for them though!! :)

Sodar
04-17-2008, 12:24 PM
One more of a Schiada trailer... this prop guard was a little sturdier than the MC trailers...

Monte
04-17-2008, 01:38 PM
Thanks Guys. I have printed off all the pictures. This should give him a very good idea of what I need..