PDA

View Full Version : Oil pressure switch


CRAIGTHEMAN
03-21-2008, 12:39 AM
hey guys i have a 2000 xstar and the oil pressure sending switch went out.the one on the back of the motor behind the intake..anyone know what i could look up at a parts store to get this switch or maybe even have a part number

TMCNo1
03-21-2008, 07:31 AM
Call a MC dealer or this might work, http://www.skidim.com/prodinfo.asp?number=R020001 or take the old one off, take to auto parts with you and get them to match, let them know what engine it goes in/on.

JohnnyB
03-21-2008, 11:19 AM
Call skidim.

JimN
03-21-2008, 11:57 AM
It's not a ski boat specific part and any auto parts store should have them. Turn the key ON and connect the wire to ground, so you can make sure it's the switch that's causing the problem. If the gauge deflects but doesn't when the motor runs, make sure the little hole on the sender isn't clogged.

CRAIGTHEMAN
03-21-2008, 07:54 PM
thanks guys if i find one that works i will let everyone know the part number thanks again

TMCNo1
03-21-2008, 09:35 PM
thanks guys if i find one that works i will let everyone know the part number thanks again

There may even be a part/reference # stamped into or on the old one for your convenience!