PDA

View Full Version : Pay it forward


6ballsisall
03-29-2005, 10:15 PM
I have the original captains chair from my 86 MC. It needs reupholstered but the seat is in good working condition. Also have the base which works as well. Free to a good home, you pay shipping and it's yours. Let me know soon, I will hold onto it for about 2 weeks and then the wifey will probably have me dispense of it.

Brn85ss
03-29-2005, 10:39 PM
Please tell me that you have another seat and your not sitting on a milk crate!

6ballsisall
03-29-2005, 10:41 PM
Yes, I bought a new one. No milk crate, it's a lawn chair!!! :D No just kidding, bought a new one similar in style from Overtons

rem_p
03-30-2005, 09:30 AM
hey man i'd be interested if you still have it....i cant find another observers seat for my 79 and ive been thinkin about just putting another bucket seat in its place....thanks

JEREMY79
03-30-2005, 09:34 AM
I have looked for two years for the base for the observers seat in my 79. I finally had one made of wood and wrapped it in fiberglass. I looked eveywhere. I found the seat itself now I need the base.

jimmer2880
03-31-2005, 08:53 AM
I have a packing rope nut & short hose for a 1" shaft if anyone needs it. I switched to the PSS system and have never looked back.

6ballsisall
03-31-2005, 09:07 AM
TPH Pm'd me first so he has first dibs on it if he wants it. Same deal for the base, I will update on this thread it if becomes available.

ski_king
03-31-2005, 09:14 AM
I have a pair of old Airguide speedometers, 82 vintage. Chrome bezel with flange on rear. Maybe somebody can use them for parts to fix up old ones as they don't make these any longer.
Any TT regular that will pay shipping can have them.

sfitzgerald351
03-31-2005, 01:01 PM
Ooooh, ooooh me, me! I'll take those speedos. PM sent!

JEREMY79
03-31-2005, 01:49 PM
I also have some Airguides. And I have a tach that was originally in my '79. The tach is free with shipping and the ol' lady says I have to make some money out of the speedo's

scott88prostar
03-31-2005, 02:32 PM
Hey I have a working fuel pump from my 454 that anyone can have...looks like this thread might take off!...not sure if it works on a small block....but my boats an 88 454.

T Scott
03-31-2005, 04:14 PM
"Pay it forward" is certainly an appropriate title for this thread. Great to see, and be affiliated with such a generous group of people. :toast: I too would rather see someone be able to use something that I have laying around than it just sit in my garage and collect dust. Bravo guys, bravo!

ski_king
03-31-2005, 04:26 PM
My Airguide's are spoken for.
Anybody else have some unsued parts somebody could use?

I do have a box of about 10 impellers that have less than a year each on them. I like to keep a spare in the boat, "just in case". While I haven't used one myself yet, it seems I give one away to someone brokedown at least every other year.

Tom Wortham
03-31-2005, 05:09 PM
Powerslot82,
I would love to have one of your extra impellers. I have an 86' Inmar 351 engine. I do need to keep a spare.... that way I will never need it.
I'll send you a private message as well. Many Thanks.

rasmithaz
03-31-2005, 05:49 PM
Powerslot 82; I need an impeller. I'll see your impeller with an original pitot pickup ( airguide gray/black two hole impossible to find) and raise you a Mari Star Owners Manual part# 99/1012. Also have speedometer out of 89 Tristar.

AirJunky
03-31-2005, 05:55 PM
Hehehe, too funny.

So I've got an Airguide speedo from a '94 PS205. I replaced it because it doesn't work. But the glass, bezel, & black face are in good shape..... in case someone is rebuilding one of their own. PM me & I'll get you a picture of it.

Also have an OEM speedo pickup in good shape.

rasmithaz
03-31-2005, 05:59 PM
Wow...that was fast. 89 Tristar speedo will be enroute to woods ave. in Lincoln tommorrow.

lakes Rick
03-31-2005, 06:09 PM
I have some money I owe to Uncle Sam.. I would be more than happy to send this to someone else.....

MarkP
03-31-2005, 07:47 PM
I have some money I owe to Uncle Sam.. I would be more than happy to send this to someone else.....Oooh, Oooh, Rick:wavey:

sfitzgerald351
03-31-2005, 08:07 PM
I think Rick meant he'd send you the bill, not the $$$.

MarkP
03-31-2005, 08:08 PM
I think Rick meant he'd send you the bill, not the $$$.Not Rick,:noface: .....

lakes Rick
04-01-2005, 10:31 AM
I think Rick meant he'd send you the bill, not the $$$.

this be correct.......

MarkP
04-01-2005, 11:24 AM
Well,

I had you all wrong

6ballsisall
04-13-2005, 07:55 PM
More parts to potentially part with!

I plan on putting on a new Edelbrock carb and a Accel Distributor. After I get it all working right my OEM Holley 4160 is up for grabs as is the OEM Prestolite distributor. The Holley IMO needs rebuilt (at the least an update kit) and the distributor works fine but needs a new cap, points, and rotor.

You pay shipping and they are yours!! (again, after I get the new parts all working correctly)


BTW, the seat and base are spoken for. TPH., they are on the way to you!! Thanks!!!! :cool:

erkoehler
04-16-2005, 02:05 AM
What else you guys got??? I am looking for any year MC boat that is free and in working order? :D

MarkP
04-16-2005, 08:50 AM
Jr

I could go for a 4160 at that price. I still have the old style on my boat..

6ballsisall
04-16-2005, 08:53 AM
Jr

I could go for a 4160 at that price. I still have the old style on my boat..




Its yours Mark. It comes off the boat today. PM me your address and I can check shipping costs. I would think it would be pretty cheap

MarkP
04-16-2005, 09:31 AM
That’s so cool thanks..

I’m goin to be just like Doug now.

André
04-16-2005, 09:35 AM
Mark
If it ain't broken...

MarkP
04-16-2005, 09:49 AM
I know André, I know. I thought about that. But, at the beginning of last season I had some minor carb issues. I thought about changing it then. If they resurface, that carb of mine is gone. If not I am going to put Js carb back on this thread, as “ Js carb”.

BriEOD
04-16-2005, 12:14 PM
I’m goin to be just like Doug now.



Oh Jeez...the position of anal boat owner and top poster has already been taken Mark. :D

Ric
04-16-2005, 12:26 PM
I have a copy of the slalom masters that doug originally sent me.
After taking a large hammer to my burner drive I sent it to mark and he sucessfully copied it and it's back in my hands(Thanks Mark)

First one to send me their address gets it (but you have to copy it and send it along to the next)

erkoehler
04-16-2005, 01:45 PM
so, it is a dvd? How long is it?

H20skeefreek
04-16-2005, 03:04 PM
I have a copy of the slalom masters that doug originally sent me.
After taking a large hammer to my burner drive I sent it to mark and he sucessfully copied it and it's back in my hands(Thanks Mark)

First one to send me their address gets it (but you have to copy it and send it along to the next)
if it's DVD, I can't do it, but if it's mpeg format, send it to me. I'll make a copy and send it along.

east tx skier
04-16-2005, 10:17 PM
It was originally VCD to make it easy to copy. You have to use a CD-RW, but it will play in most DVD players.

MarkP
04-16-2005, 10:49 PM
It is the vcd. Wont play in my dvd player but it does play in my 3rds dvd player. Oh and it will in my computer. Thanks doug:wavey:

H20skeefreek
04-16-2005, 10:58 PM
send it my way, and i'll pass it along.

SKI*MC
04-16-2005, 11:03 PM
Man, i dont ever see Malibu owners or Nautique owners this close give valued parts away. It warms my heart.

east tx skier
04-16-2005, 11:38 PM
You're welcome. It will have to be a CD-RW to play in the DVD player, if at all. Most of them should support VCD, but sometimes there's no telling what will work and what won't.

Ric
04-17-2005, 08:24 PM
send it my way, and i'll pass it along.
you got it! pm me your address

H20skeefreek
04-25-2005, 07:50 PM
got it, copied it, ready to send along. will defiantly be worth the 1.06 to ship to next person. will copy with regular CDR drive. DVD burner not necessary.

Who wants it next? PM me your address!

erkoehler
04-25-2005, 07:52 PM
If I send you a couple bucks and my address, can you make me a copy and send it to me?

André
04-25-2005, 07:53 PM
Thomas
Will you ship me in Canada ?

BriEOD
04-25-2005, 08:40 PM
Dudes, I call DIBS after Andre!!!!!

H20skeefreek
04-25-2005, 11:02 PM
erkkoehler, yep, send me 3 bucks and i'll send out a copy (buying me a beer).

Andre, will it cost me any extra to send to Cunuckland? if not too much, i sure will. PM me with an address.

milkmania
04-25-2005, 11:13 PM
erkkoehler, yep, send me 3 bucks and i'll send out a copy (buying me a beer).

Andre, will it cost me any extra to send to Cunuckland? if not too much, i sure will. PM me with an address.

my son just recently got a CD from somewhere in Canada

postal service to Oklahoma was .85 cents

east tx skier
04-26-2005, 11:06 AM
got it, copied it, ready to send along. will defiantly be worth the 1.06 to ship to next person. will copy with regular CDR drive. DVD burner not necessary.

Who wants it next? PM me your address!

Use a CD-RW, or you will only be able to watch it on a computer (of course, you could just rip it to the harddrive and send the CD-R on). But in my experience, CD-Rs don't play as VCDs in DVD players.

H20skeefreek
04-26-2005, 10:12 PM
it plays in my 3 yr. old DVD player. But that's what I'm doing, sending on the original. that's what we should all do, if we all make a copy of a copy, it will eventually get to be really crappy.

erkoehler
04-27-2005, 07:05 PM
checks in the mail!

east tx skier
04-28-2005, 11:00 AM
it plays in my 3 yr. old DVD player. But that's what I'm doing, sending on the original. that's what we should all do, if we all make a copy of a copy, it will eventually get to be really crappy.

I don't think digital copies degrade in quality from muliple copies. If anything, and I could be wrong, I'd be more concerned about the same CD getting remailed over and over developing scratches and smudges, which would show up as glitches in the copy. Either way, I'm glad everyone's enjoying it.

JEREMY79
05-12-2005, 01:28 PM
New (well used) parts up for grabs. PM if you want them all parts off my 79

Original Tach
Swim Platform (fiberglass)
Observers Seat (cushion part)

JEREMY79
05-12-2005, 05:15 PM
Got some more parts

Pulleys for 351W 2groove crank and 2 groove water pump

valve covers (original)

Spark arrestor

I think thats all for today

coba
06-04-2005, 07:53 AM
I might be interested in te speedos, if you still ave them. Call me, Conny 901-246-5261

Footin
09-30-2005, 03:54 PM
I hate to see this thread die, I am not looking for anything (unless some has perfect pass for free), but it nice to see unused parts find a good home and possibly help someone out.

Anybody got anything?

Cloaked
09-30-2005, 05:20 PM
Mag's PP made a believer out of me... :toast:

milkmania
09-30-2005, 06:00 PM
Mag's PP made a believer out of me... :toast:

I'm glad that wasn't my line!:eek3:

jimmer2880
09-30-2005, 06:51 PM
I'm glad that wasn't my line!:eek3:

You down with OPP?

Cloaked
09-30-2005, 08:23 PM
I'm glad that wasn't my line!:eek3: :D I wish it hadn't been mine... :D

Mag_Red
09-30-2005, 09:29 PM
:D I wish it hadn't been mine... :DYeah Chuck, that just didn't sound right :D

X-45
09-30-2005, 09:30 PM
You guys are kill me tonight I just shot out my nose.

:purplaugh :purplaugh

BrianM
10-31-2005, 09:35 AM
I have five 5" x 5 1/2" black lexan dash board blanks for '87 to '90 boats. They are cut to size and ready to drill or cut the holes for switches gauges etc. I needed to fix one and had to buy a minimum amount of stock so I have all of these left over. The picture below shows the one I did for my boat, the one on the left with the key and hour meter. It is glossier than the original (on the right) but looks great. Fix those cracked dash panels!

Just PM me an address and how many you want and they are yours.

pilot02
10-31-2005, 10:25 AM
Brian, I'd like to replace both sides on mine if they'll fit and I'll pick them up on the 12th (flying in the 11th) if that's ok.

Griff

BrianM
10-31-2005, 10:33 AM
Sounds great two of them are yours.

BriEOD
10-31-2005, 11:11 AM
I'll take a spare B.

BrianM
10-31-2005, 11:24 AM
Just one? PM me your address and I will get in in the mail the next couple of days.

east tx skier
03-20-2006, 11:42 AM
A big thumbs up to Perfect Pass for great customer service. I ordered an extension to my smart timer cable. Unfortunately, through some confusion, I received an extension for a jump switch of some kind. Perfect Pass is sending me the right part fed ex and doesn't want what they sent me the first time.

So if anyone knows what I have and wants it, I'll send it to you and pay the shipping (lower 48) t'boot.

milkmania
03-20-2006, 12:21 PM
So if anyone knows what I have and wants it, I'll send it to you and pay the shipping (lower 48) t'boot.

for some reason that just struck me as extremely funny!!!:uglyhamme

maybe it's just the kind of day I'm having:o

east tx skier
03-20-2006, 02:42 PM
Well, it's an extension cable for some sort of jump switch or sensor. Basically, it wasn't what I needed and they didn't want it back.

X-45
03-20-2006, 02:44 PM
What kind of end connections does it have

east tx skier
03-20-2006, 02:50 PM
It's a grey rubber piece with two female connections in it on one end. The other end (the end that plugs into the master module) looks like the end that plugs into the master module.

Workin' 4 Toys
03-20-2006, 11:27 PM
THIS THREAD IS USELESS WITHOUT PICS.....;)

east tx skier
03-21-2006, 10:54 AM
If you don't use your boat for jumping, you don't need and can't use this cable as far as I know. If I happen to have my camera handy, I'll try to remember to take a picture of it.

BrianM
04-03-2007, 02:37 PM
It's been a while since someone offered something up. This isn't much but maybe someone wants or needs it. This is the mirror mounting bracket off of my '88. This goes around the little bar on the dash and then bolts to the mirror. If you want it its yours, just let me know where to send it.

O2BESOHUGE
04-03-2007, 02:40 PM
I have five 5" x 5 1/2" black lexan dash board blanks for '87 to '90 boats. They are cut to size and ready to drill or cut the holes for switches gauges etc. I needed to fix one and had to buy a minimum amount of stock so I have all of these left over. The picture below shows the one I did for my boat, the one on the left with the key and hour meter. It is glossier than the original (on the right) but looks great. Fix those cracked dash panels!

Just PM me an address and how many you want and they are yours.

YOU STILL HAVE THESE? I NEED ONE BAD!! PLEASE PM ME

O2

BrianM
04-03-2007, 02:43 PM
YOU STILL HAVE THESE? I NEED ONE BAD!! PLEASE PM ME

O2

Sorry they are long gone. If you have a plastics place in town you should be able to find some flat Lexan stock that will work.

kah68
04-04-2007, 04:42 PM
I have an 89' Tristar and and willing to make use of or even buy any surplus parts anyone may have for this boat. It was a camp boat and needs lots of TLC. I appreciate this thread and everyones help. I never thought I would own a direct inboard open bow but I got one for cheap and am doing a 'sympathetic' resto.

Kirk

pram
04-04-2007, 05:56 PM
Is there any chance that we could revive this as I would love a copy of it.

Thanks Paul


I have a copy of the slalom masters that doug originally sent me.
After taking a large hammer to my burner drive I sent it to mark and he sucessfully copied it and it's back in my hands(Thanks Mark)

First one to send me their address gets it (but you have to copy it and send it along to the next)

delbert
05-29-2008, 12:54 AM
Anyone need the fiberglass bases that the driver and observer seat sit on? The ones I have are from a 89 Tristar 220 but may work with other models.

Monte
05-29-2008, 08:06 AM
Anyone need the fiberglass bases that the driver and observer seat sit on? The ones I have are from a 89 Tristar 220 but may work with other models.

If the seat base is for the wrap around model, the seat will not work for other applications. It is more like a luv seat;)

thijs
05-29-2008, 09:52 AM
Anyone need the fiberglass bases that the driver and observer seat sit on? The ones I have are from a 89 Tristar 220 but may work with other models.

Thanks for reviving this thread delbert. I'll be looking around for some stuff to give away..........

delbert
05-29-2008, 01:20 PM
Mine has the single seat in both driver and observer locations. I will take some pictures of the bases and post later.

Footin
10-27-2008, 06:11 PM
I don't have anything, but I always liked this thread and wanted to give it a bump.

thijs
11-03-2008, 11:56 PM
I have a new Lowe Pro camera bag just big enough for an SLR camera and comes with a front pouch. I had to buy a bigger one to fit chargers, cables and filters for my Canon Rebel XSi. Yours for free PM me your address and I will get it to you as soon as I get around the post office. Just pay it forward, the bag is less than a month old.

thijs
11-04-2008, 10:45 AM
Gone!!!!!!!!!!!!!!!!!!

BrianM
12-04-2008, 01:33 PM
Since it is that time of year it is time to revive this thread.

I have a Cipa Wing II Mirror (used but in excellent condition just like the one pictured) first one that wants it and offers something else up here to this thread to Pay it Forward gets it.

thijs
12-09-2008, 12:28 PM
:confused:Has anyone seen ATLfooter???? He called dibs on my camera case and I havent got a PM from him for his addy. I havent seen him anywhere:confused:

shepherd
08-15-2009, 06:03 PM
Cleaning out the closet. I have a barefoot suit and a woman's wetsuit, free to the first to claim them. Shipping paid by you or Pram. I'll ship USPS.

Barefoot suit: Eagle Assault, about 12 years old, but in excellent condition (except the "graphics" on the back are "cracking" a little). I only used it a few times back in the 90s when I first bought it, right before I discovered the joys of the slalom course :rolleyes:. It's been hanging in the closet since. I believe the size is Medium -- I'm 5-11 and it fit when I weighed around 170, but it's too tight at 190 :(. Pic is below.

Woman's wetsuit: Neil Pryde "Jenna de Rosnay." Don't know size but it says "40/12 Ladies" on the label. It can't be size 12 because my wife wears size 8 - 10 and it's too small for her. It belonged to my mother who used it for windsurfing. This is a cold water suit, the neoprene is thick. Pics are below.

BrianM
08-15-2009, 06:12 PM
I'll take the barefoot suit. PM sent.

atlfootr
08-15-2009, 06:31 PM
BrianM,

If you take that suit, you'll need to come down here and foot us to use it :D

My pay it frwd from thijs camera bag is two fold.

First, if anyone wants my DVD copy of Rewind09
just ask ....

Second, I had a MC poster of an X Star (X-Star owner preferred) you can have ..
If I can find it

shepherd
08-18-2009, 09:25 AM
Bump...

Still have the lady's wet suit available.

peason
08-18-2009, 09:49 AM
Shep - I will take the woman's wet suit if still available. Will send you PM. Thanks.

shepherd
08-18-2009, 09:58 AM
Shep - I will take the woman's wet suit if still available. Will send you PM. Thanks.

You got it. I'm glad it's going someplace where it will probably get used alot! ;)

keith3613
08-18-2009, 10:07 AM
Please contact me at keith.a.flud@lmco.com about the seat.

TMCNo1
08-18-2009, 10:17 AM
Please contact me at keith.a.flud@lmco.com about the seat.

You may want to edit and add a quote from the person you are asking about the seat, so it won't get lost in the shuffle. If they have subscribed to the thread for notification, they can be aware of your post and answer you. Some of these posts are as much as 4+ years old and nobody knows who your replying to.:twocents:

rholmes
08-18-2009, 10:21 AM
Since it is that time of year it is time to revive this thread.

I have a Cipa Wing II Mirror (used but in excellent condition just like the one pictured) first one that wants it and offers something else up here to this thread to Pay it Forward gets it.

probably a moot point, is this thing long gone?

BrianM
08-18-2009, 12:42 PM
probably a moot point, is this thing long gone?

Actually I don't think anyone spoke for it. I will check next time I am at my boat. If I still have it its yours.

rholmes
08-18-2009, 12:48 PM
Actually I don't think anyone spoke for it. I will check next time I am at my boat. If I still have it its yours.

SWEET!!!!!!

Hrkdrivr
08-31-2009, 11:16 AM
I have an old (~2000 or older) "IBM ThinkPad 56W Power Adapter." I used it in the old days of hand-held Garmin GPS when I would connect the GPS to my ThinkPad and it would display a moving map on the laptop, bigger than the map on the handheld.

Anyway, with the proliferation of the Nuvis and TomToms I don't run my laptop in the car/truck any more, but I figured some of you GCs or other types might.

Details:
- Input: 12 - 16 VDC
- Output: 16V, 3.5A
- Cigarette lighter input cable
- Two different output cables. One terminates in the round plug common today on lots of laptops. My laptop wants 19V, but it seemed happy w/the 16V plugged in and was charging fine. The other cable terminates in something that looks like a proprietary IBM power plug (?).

rholmes
06-01-2010, 01:13 AM
Trying to wake the dead here. Anyone doing any restoration might have use for these. I have the original CIPA mirror circa 1990, would need new mirror to be perfect, includes the mounting bracket and arm, do people restore these? Anyways, free if someone wants it. Also have the filler for the high end removable stereo option that use to exist before removable face plates came about. And last, one circa 1990 Mastercraft flip down cup holder in working condition, could use a good cleaning, and one brand new generic one from Boater's World before they closed. Any takers........

http://i98.photobucket.com/albums/l256/rholmes69/Selling%20Online/mcparts1.jpg

http://i98.photobucket.com/albums/l256/rholmes69/Selling%20Online/mcparts2.jpg

http://i98.photobucket.com/albums/l256/rholmes69/Selling%20Online/mcparts3.jpg

91prostar
06-01-2010, 07:55 AM
I have one side windshield plexi glass (triangle shape) for a 1991 tristar, pay shipping and it is yours, I had one side that was broken when I bought the boat and ended up replacing both sides so the tint would match...

rholmes
10-31-2010, 11:15 PM
Bumping this for the cup holders and removable radio slot. Mirror is gone. Also have an almost complete transmisson seal kit. Only missing the gasket that mates the tranny to the bell housing and the front seal that went around the shaft. This is for the 1:1 velvet drive 71c model. Just pay shipping, the kit is yours (normally runs $70).

tph
11-04-2010, 01:52 PM
Pay the postage and it's yours.

atlfootr
11-04-2010, 07:22 PM
You ought to donate that to the Smithsonian or better yet, USA WATER SKI MUSEUM.
Wth happened to the casing shell?

thatsmrmastercraft
11-04-2010, 09:47 PM
Pay the postage and it's yours.

PM sent......

dade61782
01-02-2012, 05:16 PM
So I have tried to sale some extra parts with no luck so I was thinking that it would be fun to start a pay it forward thread here. Basically this should be a way to clean out unused parts and gear and get it to someone who needs it. so take a look around your garage or shed for any parts or gear that you arent using and can "Pay Forward" to someone else.
As I am starting the thread, I will set some rules.

1. The gear is to be given, not sold.

2. The receiver is not to ask for the gear with the intention of reselling it.

3. Although it is not required, the receiver should make every attempt to add something to give to the thread.

4. Anyone may add gift items to the thread.

5. Try and provide an accurate description and photos of the gear.

6. First person to claim item gets item give them reasonable time to retrieve (pay shipping,pickup, etc).

7. If you receive an item and it is not what you expected or it doesn't suit you, repost it here for others.

8. This is intended to be fun, so please do your best to keep it that way.

dade61782
01-02-2012, 05:18 PM
I will start it off with a set of 1991 Prostar 190 Gauges OEM VDO gauges Black with blue includes all mounting hardware.

Volt- Case Cracked but still works
Temp
Oil
RPM

Gas Gauge is aftermarket teleflex- black and red


If you want these Pay for shipping and they are yours Paypal for shipping.
http://i446.photobucket.com/albums/qq181/dade61782/DSCN0142.jpg

dade61782
01-02-2012, 05:34 PM
Aluminum finnned "Mastercraft Power" Valve covers for a 351w need blasting and painting One has small crack repairable if you want them pay shipping Paypal

http://i446.photobucket.com/albums/qq181/dade61782/DSCN0144.jpg

dade61782
01-02-2012, 05:38 PM
cast Iron intake manifold replaced with aluminum. only 400 hours on engine when removed going to cost a fortune to ship so you pay shipping
http://i446.photobucket.com/albums/qq181/dade61782/DSCN0149.jpg

dade61782
01-02-2012, 05:40 PM
one 351w std head (other head had crack in outer waterjacket) came off a running engine with 400 Hours. painted ford blue. Replaced with gt40p. you pay shipping
http://i446.photobucket.com/albums/qq181/dade61782/DSCN0151.jpg

Lumbergh
01-02-2012, 06:14 PM
Good idea.

saberworks
01-02-2012, 07:12 PM
I have two exhaust manifold gaskets PCM RM0007 that were supposed to fit my indmar 351 in my 89 prostar 190, but never ended up needing them and sold the boat. PM me your address and I'll ship 'em.

-V-
01-02-2012, 08:26 PM
good thread!!!!! this will be interesting to watch. :D

bbymgr
01-02-2012, 10:27 PM
There is a thread already started. http://www.mastercraft.com/teamtalk/showthread.php?t=2211&highlight=forward

1redTA
01-02-2012, 11:50 PM
Aluminum finnned "Mastercraft Power" Valve covers for a 351w need blasting and painting One has small crack repairable if you want them pay shipping Paypal

http://i446.photobucket.com/albums/qq181/dade61782/DSCN0144.jpg

dade, I would like to fix them and heve them powder coated for my 81

scott023
01-03-2012, 10:48 AM
Great thread.

LaRue
01-03-2012, 01:59 PM
i have a canvas cover for 2000 210 Maristar just like the one shown in photo. Excellent shape. PO had two. Pay shipping and its yours.

LaRue
01-05-2012, 11:58 PM
i have a canvas cover for 2000 210 Maristar just like the one shown in photo. Excellent shape. PO had two. Pay shipping and its yours.

Item is spoken for...

BrianM
08-02-2012, 12:06 PM
Time to revive this thread. I have a PCM service manual. Purchased from SkiDim. It covers all PCM Ford/Chevy. All in a binder. Photo is of the first page and table of contents. You pay the shipping and its yours. This is still available from SkiDim for $31.95 + shipping.

#47of100TeamMC
08-02-2012, 01:19 PM
I have an older observer seat that I replaced due to a tear in the seam where the flip-through bolster goes. It is in the corner of the "L" opening at the seam. Nothing else wrong with it. Frame is good etc.

It came off of a 2002 TT197.

Pic is of the new one, but same colors.

Pay shipping, or come and get it.

Hudson WI. Close to Minneapolis/St.Paul, MN

Chris
chrislownsbury@gmail.com
763-370-3249

Lars
08-02-2012, 01:45 PM
Can you take a picture of the old one? NOt sure I'm visualizing what you have for a rip.

Appling77
08-02-2012, 04:26 PM
I will start it off with a set of 1991 Prostar 190 Gauges OEM VDO gauges Black with blue includes all mounting hardware.

Volt- Case Cracked but still works
Temp
Oil
RPM

Gas Gauge is aftermarket teleflex- black and red


If you want these Pay for shipping and they are yours Paypal for shipping.
http://i446.photobucket.com/albums/qq181/dade61782/DSCN0142.jpg

Do you still have these?

crank
08-02-2012, 09:07 PM
Hi BrianM,
Your PM box is full.
Thank you for your post, if I pay postage would you be willing to post to Australia?
I find that most times USPS is the cheapest option for things that we purchase.
Regard

BrianM
08-02-2012, 09:49 PM
Hi BrianM,
Your PM box is full.
Thank you for your post, if I pay postage would you be willing to post to Australia?
I find that most times USPS is the cheapest option for things that we purchase.
Regard
Sure. Box cleaned out and PM sent