PDA

View Full Version : Trailer conversion


Gonzo
02-28-2008, 04:03 PM
I am going to buy a 91 190 next weekend. The trailer has a fixed tounge. Can those be alterd to tip? or a friend of mine that has a bass boat has a tounge that slides off. Garage on the house I am buildng is billed @ 19.5 feet deep so I am worried about clearence even with a retractable tounge. Without one I am just shot in the foot.

flipper
02-28-2008, 04:12 PM
Check out this thread. Sodar did a great job on his.

http://www.tmcowners.com/teamtalk/sh...ad.php?t=19567

flipper
02-28-2008, 04:13 PM
oops, try this one

http://www.tmcowners.com/teamtalk/showthread.php?t=19567

Gonzo
02-28-2008, 04:18 PM
cant get the linky to work.

flipper
02-28-2008, 04:23 PM
try the second one

icewake
02-28-2008, 04:23 PM
the second link worked for me

Gonzo
02-28-2008, 04:25 PM
hehe, beat me to it. Thats awesome and exactly what I was looking for.

Thanks

92 190 PS
02-28-2008, 04:52 PM
I have a 92 190 and a 19.5 deep garage. When I looked at the pivothitch concept I still couldn't figure out a way to get the boat in the garage based on where my boat sits on the trailer. Keep us updated as you go through this process and pics would be great. I'll be interested to see if you can pull this off.

88 PS190
02-28-2008, 05:40 PM
in some garages you have to remove the platform, make a swivel hitch, and put the boat in then angle it to the side to get them shut.

Or... build a deeper garage.

Gonzo
02-28-2008, 08:08 PM
Or... build a deeper garage.

This is likely how we are going, or a hybrid anyway. Getting an extra 2 feet out of the garage AND adding the tilt hitch. We may be putting a garage door for access under the house on the high side.

Gonzo
03-02-2008, 04:09 PM
Well after going over the plans with the builder, we will be putting a pad under the house and parking it there.... I will have to let the boat dry up well before moving it down there. Any moisture hazards I am overlooking?