PDA

View Full Version : Sled question- hooking up a heated shield harness


mitch
12-30-2007, 09:06 PM
I'm baffled! Trying to add a heated shield harness to a 93 Polaris, pull start. So I nick a few wires to check for voltage, fire it up and using a test lite, find hot right away. Check w/ a voltmeter as a sanity check and it's at about 1VDC, gets a little higher when you rev it. check the meter on the my other sleds battery and it reads 12VDC, so the meter is ok. Here's where it gets weird. Head light works great, so I unplug that and probe for 12DVC at the plug, ahhhh about a frieking volt... ***! Any idea's? Thanks much!

airmousam@gmail.com