PDA

View Full Version : Grease zurks..


TOO-TALL
11-09-2007, 11:07 PM
Boat is a 2003 X-2.

I found the one zurk on the rudder shaft are there any more on the steering that are hidden??

Thanks

Dottiesboat
11-09-2007, 11:15 PM
Location and number of zerk fittings should be listed in your owners manual along with pictures. they can be tough to get to.

FlatBoard
11-11-2007, 09:37 PM
I have a 2004 X-30. There is one for the steering cable located underneath the alternator (at least on mine any way). It is an in-line fitting mounted in the bilge area towards the stern.

Don't have the boat here, so I can't send a picture..

TOO-TALL
11-11-2007, 09:54 PM
Thanks for the reply's guy's .I'll check tommorow after work.

Davo
11-29-2007, 02:40 PM
I have two in the bilge near the stern for rudder/steering on my '02 X5. I've greased the heck out of them for the last year or so milking my stiffening steering system/cable (seemed to help slightly), but the game is up. 5+ years on the original.

woody
11-29-2007, 02:43 PM
2005 X2 there's one on the top of rudder plate and thats it as far as we've found and dealer recons thats all there is too.... 800hours and on second steering cable

Davo
11-29-2007, 03:01 PM
2005 X2 there's one on the top of rudder plate and thats it as far as we've found and dealer recons thats all there is too.... 800hours and on second steering cable

Damn, that's a lot of water time. :toast: