PDA

View Full Version : Soft Spots In Floor


O2BESOHUGE
11-05-2007, 03:21 PM
My 89 Pro Star Has Some Soft Spots Around The Ski Pylon...i Read That There Is No Wood On The Boat? What Or How Do I Replace The Soft Spots?

Thanks
Jay

Maristar210
11-05-2007, 03:50 PM
Must be your fiberglass got soft then. :popcorn: :popcorn:

O2BESOHUGE
11-05-2007, 04:04 PM
Would You Replace With Marine Grade Plywood Covered In Resin?

Mastercraft Prob Doesnt Have Floor Panels For A Boat This Old

Lennyp04
11-05-2007, 05:30 PM
Well this would have been an easier fix for you if the boat had wooden floor panels. We had to do this to our old boat and it was a project. But we took the carpet off of that section then took the old plywood out and put new stuff in and put something over it I think. Dont remeber for sure.

Marine grade plywood maybe your best option.

TX.X-30 fan
11-05-2007, 06:16 PM
Your just too HUGE for the boat!!! :D

88 PS190
11-05-2007, 06:59 PM
well you'll have to get a good idea of what the problem is to fix it.

But to do that you need to pull that floor panel... Not the easiest on these boats, but not terrible, you'll have to pull the spotter seat as it goes over that panel.

You may be able to pull the carpet off from behind to see what's up before doing that, depending on the state of the glue.

You could use a marine plywood that's been glassed, or a composite panel, or you could lay one up out of fiberglass over most anything.