PDA

View Full Version : Jet Hot


Smitty
02-28-2005, 02:21 PM
Has anyone had their exhaust manifolds, risers, or elbows sent to Jet-Hot for refinishing? Mine are full of rust on the bottom and I was told by a friend that Jet-Hot is the best refinishing for manifolds. What do ya'al think?

bret
02-28-2005, 03:12 PM
I have my intake done and a friend of mine did his intake and exhaust manifolds. Talk to Todd Beiswenger if he's still at Jet Hot and tell him Bret sent you.

you can look at my photo gallery and see Jet Hot on the boat and on the 944. Boat application is 8 years old, car is 5 years old. Sterling 1200 is all that you should need, good luck. boat engine:

http://www.tmcowners.com/photopost/data/500/247master3-med.jpg

Smitty
02-28-2005, 03:34 PM
Thanks for the response. What was the cost to have your intake done on the boat and the exhaust on the car?

Mag_Red
02-28-2005, 03:35 PM
Jet Hot is the best! Had the vette headers coated. No rust or deteriorating of finish after 4 years of hard use.

bret
02-28-2005, 05:12 PM
The intake was a long time ago..$180(?), the exhaust, intake, and turbo down pipe were $323 shipped back to me. Just a heads up; all your threaded bolt holes, put short bolts in them and snug them up when you send it in or else you'll have to tap all the holes when you get it back. It's not a big deal but it'll save you time when you get it back.

Smitty
02-28-2005, 05:26 PM
Just went to their web site and asked for a quote. I will keep you guy's updated if I have them done. Sounds like a good deal.

bret
02-28-2005, 05:36 PM
call the 800 number and ask for Todd...get a better deal.