My Boat is ***SOLD***

[tex]

Thanks! I thought that you get an open bow when you get a family?

[east tx skier]

Just curious about what speed/rpm that you say is difficult to maintain in your description? Mine does the same thing and wanted to compare.

Pretty much everything I know is in that description. It's not exactly that it's difficult to maintain so to speak. After I installed the edelbrock intake, if you try hard to hold the throttle at 2,175 rpm (perfect pass off), the rpms will drop, then level out a bit a time or two. Kick in a tad more throttle, and it's smooth as silk. Acceleration to ski speeds and all speeds below that are smooth without a hint of hesitation. It's just when you try to hold it right at that spot that it will do this.

Our (my dealer's) best speculation is that maybe it misses the headspace (as it's raised up 1.5" or that it's a flat spot in the torque curve. I would guess the latter. Since I ski, it's proven little more than an annoyance when I happen to be moving along at 2,175 rpm, we've never messed with it. We just go ski. It may be something that someone with a bit of mechanical inclination could fix with the turn of a screw. It just never was something I have worried about.

[east tx skier]

Thanks! I thought that you get an open bow when you get a family?

Nah, you just need more storage. Besides, Granpa still has the 98 205 when we all want to pile in together. :)

[east tx skier]

As everyone knows,


25726

25727

As you wish, my master.

http://i82.photobucket.com/albums/j262/dnortonames/IMG_2018.jpg

[alletric]

I have the same thing and think that it is the torque curve. Mine is a 89 351 with a slot,OJ XMP 13.7X17.5 prop amd when you are pulling about 2100 RPM's or 22 MPH it is a constant working the throttle to maintain. Runs perfectly so it has to be torque curve/prop selection. Again has nothing to do with the sale of the boat but good luck just the same. It is amazing how much stuff you can shove up front of a close bow. That said I have always wanted an open bow so no one is ever happy!

[bcampbe7]

As you wish, my master.



I found your T-shirt Doug...

[east tx skier]

I have the same thing and think that it is the torque curve. Mine is a 89 351 with a slot,OJ XMP 13.7X17.5 prop amd when you are pulling about 2100 RPM's or 22 MPH it is a constant working the throttle to maintain. Runs perfectly so it has to be torque curve/prop selection. Again has nothing to do with the sale of the boat but good luck just the same. It is amazing how much stuff you can shove up front of a close bow. That said I have always wanted an open bow so no one is ever happy!

Well, I'm glad I'm not the only person to experience this. It's been this way for a couple of years for me.

[Jesus_Freak]

likely an abrupt change of topics, but Doug can you tell me the exact color to use to paint / touchup the trailer? My trailer is just like yours.

[BriEOD]

I saw Brieod's boat for sale and kinda had a hunch he'd be in line to buy yours???

I'd be surprised if your boat is for sale for very long. Best wishes, whats next Easty?
The thought had crossed my mind, however the timing does not line up.

[G-man]

Krylon white worked for my 93 trailer, its a little whiter than the trailerbut when your painting the axle or prop guard it's hard to tell

[TMCNo1]

One tip, if you ever order a new boat, order it with galvanized axle/axles and you will never have to touch the paint up on the axle again. The axle on our '89 is galvanized and other than washing it, I've never touched it.

[Sodar]

One tip, if you ever order a new boat, order it with galvanized axle/axles and you will never have to touch the paint up on the axle again. The axle on our '89 is galvanized and other than washing it, I've never touched it.

Damn!! I never thought of that!! I guess I will keep wrapping mine in packing foam and shrink wrap, until I have time to get it in for a full trailer tow bra. Wish you would have given me this idea 3 months ago!

[JKTX21]

Dang Cameron, are you up from last night or up early this morning?

My dad runs a galvanizer in town. I'll have to paint the rest of my trailer before I consider it though!

[Sodar]

Dang Cameron, are you up from last night or up early this morning?

My dad runs a galvanizer in town. I'll have to paint the rest of my trailer before I consider it though!

I am up and at work! Had to be here at 6am to open the jobsite.

[east tx skier]

likely an abrupt change of topics, but Doug can you tell me the exact color to use to paint / touchup the trailer? My trailer is just like yours.

Rustoleum or Krylon white over a grey primer. Like Gman said, not a perfect match, but you have to look really close (closer than any normal person would look) to tell.

[east tx skier]

Some more gel coat closeups.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/PICT0116.jpg

[Ric]

I've been away for a day or so..... Did the boat sell?

[ski_king]

It has been almost 17 hours since he has posted a picture of it, maybe he did sell it.

[east tx skier]

Boat is still for sale. Had lots of family in town, so I took a break from my selling frenzy.

http://i82.photobucket.com/albums/j262/dnortonames/IMG_2031.jpg

[east tx skier]

It has been almost 17 hours since he has posted a picture of it, maybe he did sell it.

Out skiing on the bayou today. More tomorrow.

[tex]

Eastie-You have more posts in this thread than I have overall!

[east tx skier]

Yeah, I've really been ho'in' it up.

[east tx skier]

Double post. Sorry

[east tx skier]

How did that happen?

[tex]

Yeah, I've really been ho'in' it up.
Pimps up------

[tex]

Yeah, I've really been ho'in' it up.
Pimps up------

[tex]

Double post. Sorry
Pimps up-----

[JKTX21]

HOE'S DOWN!

Doug & Tex, we had an awesome day on the river today! Went up to the island and partied with a hot Granny, saw some RVs in trees, drank about 5 million Key Lights.... doesn't get any better than that!

[east tx skier]

Wishing I could remember some of the hookaz on the point poems.

[east tx skier]

Got down on the bayou with my father in law. Squids at his Aunt's house for the week.

Who wants to buy a boat!

[tex]

HOE'S DOWN!

Doug & Tex, we had an awesome day on the river today! Went up to the island and partied with a hot Granny, saw some RVs in trees, drank about 5 million Key Lights.... doesn't get any better than that!
I spent the day driving for In His Wakes-That meant no beers for me!

[JKTX21]

I'm sure your service was much more appreciated than my good times today.

Are you going to be at Marine Creek next weekend helping out with the WB tournament?

[tex]

Count me in!!!!

[east tx skier]

Good morning, all.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/CIMG2600.jpg

[G-man]

Somebody please buy this boat. The only pictures on this site are easties. Plus inquiring minds want to see the new boat.

[Jkelly]

morning eastie

[east tx skier]

Good morning, Jason. Plus, everyone listen to George. Someone should just give in to temptation and buy it. It's been listed for five days now. Make and offer, maybe I'll bite. :)

[Ric]

don't show weakness after 5 days East!

[Sodar]

Make and offer, maybe I'll bite. :)

$15000... shipping to CA included! I need a new saltwater boat. We have a deal?

[east tx skier]

don't show weakness after 5 days East!

Don't worry, Ric, you're not in any of the pictures.

[Farmer Ted]

Good morning, Jason. Plus, everyone listen to George. Someone should just give in to temptation and buy it. It's been listed for five days now. Make and offer, maybe I'll bite. :)



ok here's the deal,

I've recently come into a substantial amount of money,
the only problem is that it's all tied up in probate
if it's ok with you, I'll send you a money order for the amount of the boat, plus a $5,000 bonus for your troubles.

Please let me know who my Nigerian bank needs to cut the money order to.........

[east tx skier]

Greetings and salutations. Your Nigerian bank can simply wire the money to my Nigerian bank. LOL!!!

[Farmer Ted]

can I get a picture of the bottom of your trailer, specifially the hole that was cut into the tube to allow the brake line to exit.

[Sodar]

Greetings and salutations. Your Nigerian bank can simply wire the money to my Nigerian bank. LOL!!!

I can wire you money from my WaMu account to your legitimate US account today!! Just say the word Eastie!! She will do a great job being a salty tractor tug! 8p

[east tx skier]

can I get a picture of the bottom of your trailer, specifially the hole that was cut into the tube to allow the brake line to exit.



Who's on the what now with the brake line going where? I don't recall mentioning that mod.

[east tx skier]

I can wire you money from my WaMu account to your legitimate US account today!! Just say the word Eastie!! She will do a great job being a salty tractor tug! 8p

You may have to catch it on ebay and pick it up. Cali is a bit of a haul for me on my dime.

[Sodar]

You may have to catch it on ebay and pick it up. Cali is a bit of a haul for me on my dime.

I am just being a pain in your arse... there is no way I would put that into salt. Hell, I paid $1800 to have a closed cooling system put on my PS 190 and could never get enough courage to actually dunk here in the salty bath tub!!!

[east tx skier]

I am just being a pain in your arse... there is no way I would put that into salt. Hell, I paid $1800 to have a closed cooling system put on my PS 190 and could never get enough courage to actually dunk here in the salty bath tub!!!

How could bumping this post be a pain in my arse. Bottom line is that when I no longer own it, it's not my boat. So tower, salt, and countless other things that weren't my cup of tea, could be in the future. Not easy to think about, but that's the reality.

[Ric]

Great pic.

nice touch allowing me to copy your pics when I quote you!

Well done
Well Done


Good morning, all.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/CIMG2600.jpg

[Sodar]

How could bumping this post be a pain in my arse. Bottom line is that when I no longer own it, it's not my boat. So tower, salt, and countless other things that weren't my cup of tea, could be in the future. Not easy to think about, but that's the reality.

Yeah, but it is still tough! Our old Tige was a SWEET, SWEET, SWEET boat... not an MC, but cherry and totally optioned out. Our neighbor bought it and in 4 months he had blown the engine up (ran it with the thru-hull valve closed), crashed it into the dock and left a 2' by 2' spidercrack in it and bent the tower by going under a low bridge and hitting the tower on the bridge. From now on, when I sell my stuff, it will be to someone I will never see again. My old MC is up in Idaho somewhere... I hope that I never see it again, because the guy that bought it was not going to take care of it... you could just tell. He had the cash though, so away it went!! :o

[east tx skier]

Possibly easier said than done on my part. But I knew that going in, so, as they say, money talks.

[Leroy]

Someone will pick this beautiful boat up, I think now may be a harder time to sell that late spring time.

I'm shocked it has been on this long!

[east tx skier]

Nah, just been listed five days. I'm not in any real hurry to move it (as you can probalby tell, this isn't exactly a fire sale). I'm just enthusiastic. As for timing, we're just getting started with the good skiing in Texas. I know the season is ending for some, but this is the best time to be on the water around here.

[Farmer Ted]

Who's on the what now with the brake line going where? I don't recall mentioning that mod.


no mod, just want to see if your trailer has a hole cut in the bottom of it near the axle so that allows the brake line to be stuffed inside the trailer except where it exits the trailer near the axle

[JohnnyB]

Wow, just back from 10 days of vacation to see this. All h@!! did break loose last week while I was gone.

ETS...glad to hear you are hanging around. Beautiful boat with all those extras will probably move pretty fast.

Best of luck.

"realizing the dream of a closed bow" ????????

What are ya really shopping for next?

[east tx skier]

no mod, just want to see if your trailer has a hole cut in the bottom of it near the axle so that allows the brake line to be stuffed inside the trailer except where it exits the trailer near the axle

They had some sort of sheath around the brake lines for that year, which is why I now have stainless steel brake lines. I'll check and see if I can get a picture under there tonight.

[east tx skier]

Wow, just back from 10 days of vacation to see this. All h@!! did break loose last week while I was gone.

ETS...glad to hear you are hanging around. Beautiful boat with all those extras will probably move pretty fast.

Best of luck.

"realizing the dream of a closed bow" ????????

What are ya really shopping for next?

Thanks for the compliment. As to what the future holds, I'm holding the old cards close.

[east tx skier]

For Harold.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/NewlyFinishedPlatform2Web.jpg

[G-man]

Farmer

in 93 they did the rubber around the line inside the trailer. About 1 1/2 years later a lot of us had brakeline leaks from the moisture held between the rubber and SS lines. I went back in with a new SS line no rubber and no new problems

Good start on the teak, when are you going to finish the job???? LOL

[east tx skier]

I seem to recall that we ditched the rubber when we redid the lines on my boat. But before I go on record with that, I'll need to double check.

G-Man, that's just the first coat.

[Farmer Ted]

Farmer

in 93 they did the rubber around the line inside the trailer. About 1 1/2 years later a lot of us had brakeline leaks from the moisture held between the rubber and SS lines. I went back in with a new SS line no rubber and no new problems

Good start on the teak, when are you going to finish the job???? LOL

Thanks G!

I'm talking about the hole that's cut into the trailer to allow the brake line to pass from inside to outside

unless the brake lines on a 93 didn't get housed inside the trailer "tube" itself back then,,,,

[east tx skier]

Ah, now I'm tracking. I'll see if I can snap a picture over lunch.

[Ric]

this thread went ten hours without a post or a pic????????????????

[east tx skier]

Here's one.

http://i82.photobucket.com/albums/j262/dnortonames/RawleyVision1.jpg

Note: Rawley Vision mirror is not Included. Perfect Pass display shown is the older gauge. Boat comes with new style wide PP display.

[Sodar]

Note: Rawley Vision mirror is not Included. Perfect Pass display shown is the older gauge. Boat comes with new wide display.

Good thing! That mirror blocks bow access :noface: ... you can keep it for your new N-boat! :dance:

[east tx skier]

That mirror is just a garage decoration at this point. Cipa extreme is the only way to fly. It does come in handy as an Archimedes death ray for jet skiers though.

[Sodar]

That mirror is just a garage decoration at this point. Cipa extreme is the only way to fly. It does come in handy as an Archimedes death ray for jet skiers though.


I have heard the extreme works well for boats without towers, I guess on boats with towers, you just see the tower in the right and left panes!

[east tx skier]

Don't know about towers, but my experience is that you get a little bimini pole in the side panels. But overall, it has been great and skier visibility has been greatly improved. The real key is my wife likes it.

[Lark]

DANG! Will you write a For Sale ad for me? LOL

Sorry to see you get rid of it; that's got to be the best looking frequently used Mastercraft of it's age I have ever seen.

[east tx skier]

DANG! Will you write a For Sale ad for me? LOL

Sorry to see you get rid of it; that's got to be the best looking frequently used Mastercraft of it's age I have ever seen.

Wow! Thanks. It's be no means perfect, but has definitely been lovingly cared for during my watch.

I very much hope that someone here buys it. As the end of this work week, I may feel compelled to put it out more to the general public. So if someone is interested, please don't wait to let me know.

[rodltg2]

but if somone from the board buys it, they wont have the fun of posting pics of their new boat., that is unless they can find a shot you havent covered yet!:D

[east tx skier]

I'm sure they can find a shot that I haven't taken yet. Maybe it will be the stage for the next great swimsuit photo?!?!

[JimN]

"It does come in handy as an Archimedes death ray for jet skiers though."

I thought that was made of polished brass.

Did you see the Mythbusters episode about that?

[east tx skier]

"It does come in handy as an Archimedes death ray for jet skiers though."

I thought that was made of polished brass.

Did you see the Mythbusters episode about that?

Yes I did. I also saw the one where MIT or some engineering dept. got it to work, albeit very slowly.

[east tx skier]

no mod, just want to see if your trailer has a hole cut in the bottom of it near the axle so that allows the brake line to be stuffed inside the trailer except where it exits the trailer near the axle

I didn't get a really close look, but I did glance under there once. It looks like there is a 2.5"1" square cut in the bottom of the tube well forward of the axle (port side of the trailer. The brake line runs back toward the wheel on that side, then across the axle to the other wheel. I'm no expert in this regard, but this is the best I can tell.

As for other drains, there are two drains on the back of the trailer where the diagonal tubes connect at the prop guard. This was added when we put the solid prop guard on there so that water couldn't pool inside the back of the tubes. It's on the front (tounge side) of the bottom of the diagonal tubes on either side of the trailer just above the prop guard. We put them on the front because the trailer is always stored nose low when garaged.

[east tx skier]

Up we go.

http://i82.photobucket.com/albums/j262/dnortonames/IMG_2025.jpg

[BriEOD]

Good grief you have not sold that ol' tub yet? What's a matter with you boy! ;)

[Monte]

Good grief you have not sold that ol' tub yet? What's a matter with you boy! ;)

I... for one.... Do not think he is trying hard enough:rolleyes: :D

[east tx skier]

Good grief you have not sold that ol' tub yet? What's a matter with you boy! ;)

Not quite yet. :)

I... for one.... Do not think he is trying hard enough

I've slacked on the post 'ho'ing this evening. I was out oiling the platform. Got one coat done, which is drying. New owner will receive the boat with a freshly oiled platform.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/PICT0096.jpg

/Yes, Harold, I rubbed it on with my bare hand this time. I've been wasting oil all this time. :o

[tex]

Up we go.

http://i82.photobucket.com/albums/j262/dnortonames/IMG_2025.jpg
Go to bed Doug!!!!!!!!

[east tx skier]

Go to bed Doug!!!!!!!!

Sales don't sleep! ;)

By request, a picture of the heat stamp on the observer seat back. Sorry it's small. I'll try to get a better shot of it soon.

http://i82.photobucket.com/albums/j262/dnortonames/JumpSeatFrontView.jpg

[east tx skier]

Just to confirm some information I provided someone. Here are the specs from the manual for this boat. Mine is the second column (351 HO).

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/91--93ProStarSpecs.jpg

[TMCNo1]

Not quite yet. :)



I've slacked on the post 'ho'ing this evening. I was out oiling the platform. Got one coat done, which is drying. New owner will receive the boat with a freshly oiled platform.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/PICT0096.jpg

/Yes, Harold, I rubbed it on with my bare hand this time. I've been wasting oil all this time. :o


What can I say, and please go ahead and lay down in the boat and take a nap. You have been standing there in the boat for nearly 18 hours and your gonna fall asleep, fall out of the boat and drown!

[east tx skier]

Don't worry, I'm not locking my knees.

That gives me an idea. I could have a "Hands on a MC" contest. $1000 per person for 17.5 people. 5 minute break every hour. 20 minute break every three hours. One hand on the boat at all times. Last person standing takes it home.

[tex]

You remind me of Erk when he was first trying to buy a boat!

[east tx skier]

Do you remember the thread when Jrandol was looking for a boat for the first time many moons ago. It was up there with the erk thread.

But in my defense, I brought lots of pictures. :)

[tex]

Just having fun with you!

[east tx skier]

Is this the fun part? Are we having fun yet?

Jump seat (looking down). There are now 2 cupholders in the seat.

http://i82.photobucket.com/albums/j262/dnortonames/JumpSeatTopView.jpg

[ski_king]

Don't worry, I'm not locking my knees.

That gives me an idea. I could have a "Hands on a MC" contest. $1000 per person for 17.5 people. 5 minute break every hour. 20 minute break every three hours. One hand on the boat at all times. Last person standing takes it home.
Forget the breaks, that will speed up the contest a little.
If Hoosier and Steve get in on it, so will I.
I will even supply a keg or 2.

[Leroy]

Hmmm, could I get a picture of that? Two cupholders would be much better than one!

Is this the fun part? Are we having fun yet?

Jump seat (looking down). There are now 2 cupholders in the seat.

http://i82.photobucket.com/albums/j262/dnortonames/JumpSeatTopView.jpg

[east tx skier]

Forget the breaks, that will speed up the contest a little.
If Hoosier and Steve get in on it, so will I.
I will even supply a keg or 2.

It's pretty much how they get rid of cars around here. Link (http://www.longviewtx.com/HOHB/default.html)

If you haven't seen the movie (http://www.amazon.com/Hands-Hard-Body-Paul-Prince/dp/B00000JYWZ), I highly recommend it for a laugh.

[east tx skier]

Hmmm, could I get a picture of that? Two cupholders would be much better than one!

Ask, and ye shall receive. :)

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/TwoCupHolders.jpg

[milkmania]

bump of the morning

[east tx skier]

Thanks, Milk.

[Sodar]

Ask, and ye shall receive. :)

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/TwoCupHolders.jpg

The vinyl around the cupholders looks a little rippley and wavy and there are exposed staples... Can you please comment?

I just want the prospective buy to know EXACTLY what he is getting!! 8p

[east tx skier]

Those are the hinges. The seat back lifts up to provide for storage behind it. I have the "trim" vinyl with the replacement skins, which can be used to cover the hinges if the new owner so desires.

[Sodar]

Those are the hinges.

I see the hinges, but I also see staples around the hinges... :rolleyes:

http://i82.photobucket.com/albums/j262/dnortonames/JumpSeatTopView.jpg

[east tx skier]

Ah, I see what you mean. You're right. The trim vinyl will cover those, too. I never got around to it. It took me long enough to get that thing built.

[Sodar]

Ah, I see what you mean. You're right. The trim vinyl will cover those, too. I never got around to it. It took me long enough to get that thing built.

I am just giving you trouble! That seat looks great and is even cooler that it looks orginal, with factory skins! :toast:

[Ric]

Hey Doug, it's been a week. That boat sell yet?

[G-man]

Hey Doug, it's been a week. That boat sell yet?

I need a few more pictures before I commit to buy. Do you have a shot of the nuts that hold the tracking fins??? But first I'll have to ask my ski partners if they are interested.

[east tx skier]

I am just giving you trouble! That seat looks great and is even cooler that it looks orginal, with factory skins! :toast:

Thanks, but you know that I have thought about the fact that I never got the trim/hidem installed there. :o

[east tx skier]

I need a few more pictures before I commit to buy. Do you have a shot of the nuts that hold the tracking fins??? But first I'll have to ask my ski partners if they are interested.

George, they need to get after it.

The tracking fins aren't held on by nuts. They're held on by awesome! :cool: Will your ski partners require "show fins." ;)

[east tx skier]

Hey Doug, it's been a week. That boat sell yet?

Not quite yet. But we're working on it.

[east tx skier]

Top of the morning to everyone.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/IMG_1994.jpg

[Sodar]

Good Morning, Douglas! Do you have an pictures of the boat with bikini clad women aboard? I think that something like this would really boost interest!! :D

[Monte]

I have a feeling oldriver needs to be steered to this thread...........

[tex]

Good Morning, Douglas! Do you have an pictures of the boat with bikini clad women aboard? I think that something like this would really boost interest!! :D
No he doesn't....Ump, can we get a poll for this thread?

[east tx skier]

Good Morning, Douglas! Do you have an pictures of the boat with bikini clad women aboard? I think that something like this would really boost interest!! :D

My wife is partial to the one piece and has a strict "keep me off the web" policy. Sorry.

[east tx skier]

I have a feeling oldriver needs to be steered to this thread...........

If you want to do some steering, I wouldn't complain. :)

[BrianM]

Top of the morning to everyone.

http://i82.photobucket.com/albums/j262/dnortonames/MasterCraft%20Pro%20Star%20205%20For%20Sale/IMG_1994.jpg

I can't believe that you sit your ski on the vinyl and gel. :confused: Shame on you :rolleyes:

[G-man]

I can't beleive he ski's in those shorts !!!

[east tx skier]

I can't believe that you sit your ski on the vinyl and gel. :confused: Shame on you :rolleyes:

You know me better than that. There's padding there. It was well hidden for the shoot.

[bcampbe7]

You know me better than that. There's padding there. It was well hidden for the shoot.


As well as one of those law people! She would whoop you bad! :D

[east tx skier]

As well as one of those law people! She would whoop you bad! :D

It wouldn't take much. :o

[east tx skier]

I can't beleive he ski's in those shorts !!!

You guys are brutal about my shorts. :o At least I didn't have any socks with holes in the toe in any pictures (so far).

Heading for Houston tonight, so you all will be spared some shameless post bumps and pictures for a spell. But I'll be back. :cool:

Have a good weekend everyone!

[G-man]

Just trying to give you a bump. At least we can't see your black knee socks and sandals that match your belt

[east tx skier]

Much obliged. I'll wear dress socks and sandals for a sale!!!

[Kyle's_prostar205]

Eastie~~Did you sell it yet?

[Ric]

boat sell ?

[G-man]

I bet it hasn't sold because he doesn't have the custom cutting boards on his trailer....I wonder if the next boat will????

[east tx skier]

Boat is still for sale, but things are starting happen. I've had some local interest and some not so local interest. Not bad for just having it listed here and a few other places. Pretty soon, if it hasn't sold, I'm going to have to consider a bit more exposure.

[Ric]

I bet it hasn't sold because he doesn't have the custom cutting boards on his trailer....I wonder if the next boat will???? Like you have always said George..... It depends on the dealer

[G-man]

Pretty soon, if it hasn't sold, I'm going to have to consider a bit more exposure.

I hope this doesn't mean he taking off the swim shorts?????

[east tx skier]

You never know. What's it worth to someone to keep that from happening. :eek:

[6ballsisall]

You never know. What's it worth to someone to keep that from happening. :eek:


Easy there Doug! If you start getting the hungry for the Coffee you might turn into Erk!!! 8p Before you know it you'll be visiting the dry cleaner daily to pick up your plaid suits!!

[TMCNo1]

I bet it hasn't sold because he doesn't have the custom cutting boards on his trailer....I wonder if the next boat will????


Doug, throw in a set of Ginsu Knives and 20 lbs of fresh fish and I bet it goes quick!:D

[east tx skier]

Let's hope it doesn't come to that. But I likes the coffee so you never know.

[6ballsisall]

Doug, throw in a set of Ginsu Knives and 20 lbs of fresh fish and I bet it goes quick!:D


Harold you had me at Ginsu! Sold!! :D

[JimN]

"What's it worth to someone to keep that from happening?"

What do you want? Money, watches, free trip? Please, for the love of God, DON'T DO IT!

Can you get Billy Mays to do an infomercial?

[east tx skier]

Money. And Billy charges too much and wanted to do a demo where he set fire to the gel coat to show that his new wax protected it. Deal breaker for me.

[JimN]

"What's our motto?"

"Aim low!"

[east tx skier]

I Love it. Dodgeball, right? But can I have a quote from a true classic? ;)

[JimN]

I suggest you use this to sell your boat. Just replace the applicable words.

Hi there! How you doing?

This your ten dollars?
I saw it floatin' underneath the car.

- Here you are. What's your name?
- Stanley dewoski.

Polish, eh? What a coincidence! Rudy polanski.

- I like that watch... great shoes!
- Thanks.

So, you want to buy this buick, huh?
You got good taste.

Nice to see somebody on this lot who
knows a good car when he sees one.

- So, we write it up?
- Actually, i was just looking.

Hey, terrific! Here you can look, browse,
taste, smell, do anything you want.

Nobody's gonna pressure anybody
around here.

I really think
you ought to buy this buick.

You ought to buy it right now.
This buick is you.

This is your car! Stanley dewoski
is buick centurion convertible.

You're thinking,
"can i afford to buy a car like this?"

You can't afford
not to buy a car like this.

When you add this whole thing up,
you'll come out dollars ahead.

The prestige of owning a buick centurion
can't be measured in dollars and cents.

[TMCNo1]

I suggest you use this to sell your boat. Just replace the applicable words.

Hi there! How you doing?

This your ten dollars?
I saw it floatin' underneath the car.

- Here you are. What's your name?
- Stanley dewoski.

Polish, eh? What a coincidence! Rudy polanski.

- I like that watch... great shoes!
- Thanks.

So, you want to buy this buick, huh?
You got good taste.

Nice to see somebody on this lot who
knows a good car when he sees one.

- So, we write it up?
- Actually, i was just looking.

Hey, terrific! Here you can look, browse,
taste, smell, do anything you want.

Nobody's gonna pressure anybody
around here.

I really think
you ought to buy this buick.

You ought to buy it right now.
This buick is you.

This is your car! Stanley dewoski
is buick centurion convertible.

You're thinking,
"can i afford to buy a car like this?"

You can't afford
not to buy a car like this.

When you add this whole thing up,
you'll come out dollars ahead.

The prestige of owning a buick centurion
can't be measured in dollars and cents.




And we need to dress him up, for when a potential buyer shows up for his appointment,

[JimN]

Ya got anything in powder blue or orange, with contrasting stitching? Oh, yeah- and r e a l l y - w i d e - l a p e l s !

[east tx skier]

Very nice. Is that David Byrne?

Boat is on ebay as a "Buy it Now" or "Best Offer" only listing. Price reduced to $16,500 as the replacement skins are off the table with the buyer having first option on them in a separate transaction. It's the least expensive 205 listed on ebay (and will be the only 205 listed on ebay in a few hours).

While I would still much rather sell it to someone here, after two weeks, it is time to push the listing out to the masses. But if anyone here wants it, email me, and we can work out a deal outside of ebay.

[Farmer Ted]

Very nice. Is that David Byrne?

Boat is on ebay as a "Buy it Now" or "Best Offer" only listing. Price reduced to $16,500 as the replacement skins are off the table with the buyer having first option on them in a separate transaction. It's the least expensive 205 listed on ebay (and will be the only 205 listed on ebay in a few hours).

While I would still much rather sell it to someone here, after two weeks, it is time to push the listing out to the masses. But if anyone here wants it, email me, and we can work out a deal outside of ebay.


I like this little seat, I wonder if that will fit in the middle of the walkway too?

Looks like a steal with the LT1 and tandem axle trailer.



http://i12.ebayimg.com/06/i/000/af/fa/719e_12.JPG

[east tx skier]

It will. In fact, that's where it's designed to be (even though the base isn't contoured).

Definitely a good deal on the original xstar hull. Somebody buy that one so we can get back to talking about my boat. :)

[Ric]

Doug. Did the boat sell?

[east tx skier]

Not unless you know something I don't. But I'll check the auction page.

[Ric]

how bout a pic refresher? I mean it is friday and all

[east tx skier]

I'm almost plum out.

[Ric]

can you not add an ebay link to this thread?

[east tx skier]

Sure. Price is lower than was originally listed here because the replacement skins are not included in the ebay listing. As always, I will entertain reasonable offers and will find unreasonable offers entertaining.

Link to Ebay Listing (http://cgi.ebay.com/ebaymotors/1993-MASTERCRAFT-PROSTAR-205-MASTER-CRAFT-SKI-BOAT_W0QQcmdZViewItemQQcategoryZ63686QQihZ007QQite mZ170142031599QQrdZ1QQsspagenameZWDVW)

[Ric]

looks like a steal

[east tx skier]

looks like a steel

The prop guard is, but the prop is NiBrAl. :D

[dmayer84]

I think you need some more pictures on the ebay listing :D

[east tx skier]

I think you need some more pictures on the ebay listing :D

Ha! I don't think you can put more pictures on an ebay listing!

[JohnE]

For someone who hasn't had the time to read the previous 399 posts, what are you replacing the '93 with? Or is it a secret?

[MarkP]

Hey JohnE, How come you got no shots of your 05 in your user gallery? I love the 197!!

[JohnE]

Hey JohnE, How come you got no shots of your 05 in your user gallery? I love the 197!!


Mark,

I'll get on that after this weekend. Going Heading out early tomorrow for 2 days. I guess I just never thought of it. I'm not so great with posting the pic's but have done a few.

John

[MarkP]

Cool,,
I’m a big fan of that 197 and don’t get sick of seeing them..

Try to figure out how to get your shots into your “user gallery” then if someone wants to se your boat they just have to click on the camera at the top right of any post that you make.. You should have a little camera in the upper right
like I do in my post..

[Jim@BAWS]

Saw this photo on Ebay. That Yellow 205V and Hummer was SOLD out our dealership. MC wanted to know who it was at the time in the
STAR Magazine...Wow does that bring back some good memories

Doug that boat should be gone soon...Now listen to me

"NO GOING TO THE DARK SIDE" You got it !!!

Jim@BAWS

[RexDog1]

WHAT!!!!!!!! Your boat is for sale????? When did this happen? :eek3:






































Bump :D

[east tx skier]

Jim, I'm surprised anyone can get through that listing to the pictures without nodding off! ;)

[east tx skier]

Just a quick bump.

Sale Pending!

[ttu]

so are you finally going to tell us what you are going to get besides "next one will be a closed bow":rolleyes:

[sanjuan23]

Sale Pending I guess it was just what someone was looking for....

[BriEOD]

so are you finally going to tell us what you are going to get besides "next one will be a closed bow":rolleyes:
I can't wait to read this one!!:popcorn:

[Ric]

whah happened ?

[Kyle's_prostar205]

Is it via EBAY or did you get a local person?

[east tx skier]

so are you finally going to tell us what you are going to get besides "next one will be a closed bow":rolleyes:

Nope, that's worked pretty well so far. :)

I can't wait to read this one!!:popcorn:

Wait no longer. And make room at the bar because I'll be pulling up next to you and crying in my beer when she's no longer mine.

whah happened?

The boat went from "FOR SALE" to "SALE PENDING!" I declined a pending offer I was considering from an in-state ebay buyer and ended the ebay listing early.

Is it via EBAY or did you get a local person?

I'm happy to say that a long time member of this forum, who was nice enough to make me an offer within 24 hours of my listing it on here emailed me today to say he was looking forward to "meeting me in St. Louis." As for who this person is, I'll leave that up to him to announce when he is ready to do so. As for all the other details of the transaction, that's between me and the buyer.

I can't tell you how happy I am to know that boat, assuming all goes according to plan, will go to a fellow Team Talk member.

[sanjuan23]

Sounds like shady lawyer speak to me :)

[east tx skier]

Everything that comes out of my mouth is technically shady lawyer speak. :cool:

[JKTX21]

That is the ending I was hoping for. My stomach turned a bit when you seriously informed everyone you were selling your boat.

The only thing I can think of is for Harold to sell you his 190 since we all know how you like pristine boats! 8p

[BriEOD]

Glad to hear it Doug. I hope you have a safe trip.

[SkiDog]

Hey Doug, Congrats man! I knew it wouldn't last too long! BTW, it was great talking to you as usual! I sure wish you could make it to MAg Mania! :)

[erkoehler]

Doug, you should meet at Mag Mania to deliver your boat.....

[east tx skier]

Thanks, all. I thought about that, but I've got obligations that weekend unfortunately. Plus, I don't think it would be a very convenient meeting place for the buyer.

[Footin]

OK, spill the beans......who bought it????????????

Who would want to meet in St Louis as a half way mark.....Hhhhhhmmmmm?????

[east tx skier]

OK, spill the beans......who bought it????????????

Who would want to meet in St Louis as a half way mark.....Hhhhhhmmmmm?????

Yeah, like that's any help. Draw that circle out from St. Louis and see how many you come up with. And you just assume it's half way. 8p

[Footin]

UMP will probably start a poll about who the new buyer is, I have a thought of who already..................

[6ballsisall]

Alot a boats seem to tend to head North. I can only guess Easty's boat is headed north of St. Louis.

[André]

Anyone knows for how long a boat sale can be "pending" in Texas???
Anyone?
Anyone?
Will even accept a lawyer's answer...;)

[Footin]

I would expect the Lawyers answer to be very confusing and long winded.

[André]

I would expect the Lawyers answer to be very confusing and long winded.
...and expensive!!!:D

[Footin]

Word!!!!!!!!!!!!!!!!

[Footin]

Who is the northerner that is making said purchase????????????

[east tx skier]

I anticipate that the sale will be something other than "pending" by tomorrow or the next day. That'll be $25.

[mitch]

I anticipate that the sale will be something other than "pending" by tomorrow or the next day. That'll be $25.

Congrats Doug, glad you sold it and I was right....this thread would be hit 10K easy....

[mjw101081]

I feel like a kid posting that i am laughing but, fleabay,i love it.

[shepherd]

I anticipate that the sale will be something other than "pending" by tomorrow or the next day. That'll be $25.

Boy, you're cheap!

[east tx skier]

The boat is sold. Personal delivery will commence Friday morning and should be completed by Saturday afternoon. Thanks for all of your interest and shameless thread bumps.

[tex]

bump................

[bcampbe7]

bump................


LOL! Perfect Tex... 1 minute after his post! :uglyhamme :uglyhamme

Congrats on the sale Doug. The new owner is going to get one well cared for MasterCraft.

Oh and if you are still looking for a closed bow...
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

[east tx skier]

LOL! Awesome! You think we can get this thread to 20K views by next week?

[G-man]

Have a good trip.

[east tx skier]

Thanks. Next stop ... Graceland!

[Ric]

can you at least give us a hint prior to delivery?

[tex]

Thanks. Next stop ... Graceland!
The King purchased your boat!!!! I always liked his jumpsuits. I just didn't know he jumped. I don't think he will fit in your jump seat!

[TMCNo1]

Could it be Ski King??????????????

[sunsational]

Now that it is sold, do we get any clues on the purchase? :)

[Footin]

Since you are headed east of Texas you oughta load the boat with Coors beer and try to make it in 8 hours...........no wait that would be boot leggin! (or maybe boat leggin hehehehehehe)

[tex]

Could it be Ski King??????????????
Let it happen Captain!

[Maristar210]

With all due respect to our great leader.....

Never before has one boat sale generated so much attention.

Buncha Suck asses :D

[tex]

With all due respect to our great leader.....

Never before has one boat sale generated so much attention.

Buncha Suck asses :D
You are bitter tonight! Need a drink?

[east tx skier]

With all due respect to our great leader.....

Never before has one boat sale generated so much attention.

Buncha Suck asses :D

I'm sure glad it did!

But for what it's worth (and here's the useless hint as to the buyer's ID), the buyer contacted me within the first twenty-four hours of my posting it for sale here. So everything posted after that initial contact was just good fun and lots of pictures. :)

I traded my previous boat, so this is my only experience selling one myself. But in this brief experience, I can say that it's little more than good timing.

Then again, I guess it would've sold on ebay. But I much prefer the way it worked out with someone on here getting it.

[Maristar210]

You are bitter tonight! Need a drink?


Maybe TEX, maybe....

[Maristar210]

You are bitter tonight! Need a drink?


Maybe TEX, maybe....

[Ric]

I'm sure glad it did!

But for what it's worth (and here's the useless hint as to the buyer's ID), the buyer contacted me within the first twenty-four hours of my posting it for sale here. So everything posted after that initial contact was just good fun and lots of pictures. :)

I traded my previous boat, so this is my only experience selling one myself. But in this brief experience, I can say that it's little more than good timing.

Then again, I guess it would've sold on ebay. But I much prefer the way it worked out with someone on here getting it. too bad you couldn't be sure THEN, that all this chat during these past weeks since the initial contact was only good fun and pictures:rolleyes:

I've sold two inboard ski boats in the past 10 years and I do not like the process. Like you, I tried a few angles prior to listing on ebay. But it was ebay who brought me my buyer.

The one thing that worked well for me on my last sale was to get my buyer to agree, that at his low price, he'd have to buy my boat from the dealer (at the buyer's price) as I used the boat as a trade-in against a new one. That is the one thing that made selling the boat myself worthwhile.

[ski_king]

Could it be Ski King??????????????
Nice boat, but I think I will stick with a closed bow.

[east tx skier]

too bad you couldn't be sure THEN, that all this chat during these past weeks since the initial contact was only good fun and pictures:rolleyes:

I've sold two inboard ski boats in the past 10 years and I do not like the process. Like you, I tried a few angles prior to listing on ebay. But it was ebay who brought me my buyer.

The one thing that worked well for me on my last sale was to get my buyer to agree, that at his low price, he'd have to buy my boat from the dealer (at the buyer's price) as I used the boat as a trade-in against a new one. That is the one thing that made selling the boat myself worthwhile.

Yeah, ebay got the most exposure to interested buyers. Well over 2,000 independent IP views and 73 people (72 if you don't count Ric) watching the auction. I had a very good offer during the last 24 hours, but by then the Team Talk buyer had been able to work out the details and we got it sold.

Even though doing it this way involves a bit of driving on my part, I still prefer it.

Overall, the process, though short and sweet, got me a little more worked up than I like to be.

So you got a price, then got the dealer to agree to take it in on trade at that price? A lower price? So he gets a deal and pays the sales tax you'd have paid otherwise? Beautiful!

[Ric]

Yeah, ebay got the most exposure to interested buyers. Well over 2,000 independent IP views and 73 people (72 if you don't count Ric) watching the auction.

The process got me a little more worked up than I like to be.

So you got a price, then got the dealer to agree to take it in on trade at that price? A lower price? So he gets a deal and pays the sales tax you'd have paid otherwise? Beautiful! heck ya! AND (at least in TX) the tradein value (sales price to my buyer) comes OFF the price of the new boat prior to calculating sales tax on the new boat
WIN - WIN - WIN


note: to the lower price question... it was only a lower price because my particular buyer beat me up, but whatever price you agree to, THAT is the tradein value.... IF you have an agreeable sales staff at your favorite dealership anyway! (because some dealers don't like to mess with the "in and out" as they call it)


Dealer likes it too because in the case of my last boat, he actually got to do the financing for my buyer. WIN WIN WIN WIN

[east tx skier]

That's what I'm saying. So they gave you your buyer's low price on trade in? I guess, for them, they get to move two boats quickly. Or three if you count the '04 with the crooked tower. :o

[Ric]

That's what I'm saying. So they gave you your buyer's low price on trade in? I guess, for them, they get to move two boats quickly. Or three if you count the '04 with the crooked tower. :o yes, you have it right, they take your agreed price as trade. I dont think they get much out of "moving" the tradein boat, but like I say, they made a finance customer and probably began a dealer relationship with that buyer which could lead to another sale down the road of course.
oh and the crooked tower install was on the 05, thanks for reminding me :mad:

[TX.X-30 fan]

yes, oh and the crooked tower install was on the 05, thanks for reminding me :mad:



Wonder what dealer performed that install. :confused: ;)

[Ric]

Wonder what dealer performed that install. :confused: ;) Ask George the Nman,,, errr I mean, Gman...:cool:

[east tx skier]

yes, you have it right, they take your agreed price as trade. I dont think they get much out of "moving" the tradein boat, but like I say, they made a finance customer and probably began a dealer relationship with that buyer which could lead to another sale down the road of course.
oh and the crooked tower install was on the 05, thanks for reminding me :mad:

And they put it on a "homemade trailer" or so the story goes.

So both of your boats were 05s? Oh, I guess I'm thinking of the 04 TT boat, a/k/a the loaner.

[east tx skier]

Wonder what dealer performed that install. :confused: ;)

Same one that sold me my 93 in 03.

[Ric]

And they put it on a "homemade trailer" or so the story goes.

So both of your boats were 05s? Oh, I guess I'm thinking of the 04 TT boat, a/k/a the loaner. "homemade" trailer was done by an outfit in kemah, yes, 1 04(loaner), 2 05's, 1 06 trailer(loaner) and now a really nice 07 trailer... Dealer was responsible for all but the trailer issues, yet he never left me boatless... I'll say it again, Darryl is a good guy. I think they got too big though. alot of those follies could have been avoided with good management.

[east tx skier]

Daryl is a very good guy. In fact, my experience with Todd was very good as well. Moreover, but for mounting my rear bimini straps well aft of the ski pylon, their service department was great for the two times they did work for me (perfect pass and bimini install).

Now the guy that used to answer the phone in the parts dept. was another story. Fortunately, I knew enough to have all part numbers ready when I called so he didn't have to do much thinking. But he did always call me back, which was very much appreciated.

Yes, the comment about management is right on. Daryl would always bend over backwards to put out whatever fires got started while his back was turned. My brother in law would probably have bought a boat from them had his wife not gotten the sleazy sales tactics from one of the guys there (not Todd). When Daryl got wind of it from my brother in law, he gave my sister-in-law the personal tour of the facility and was nice enough to show her the boat she'd driven over there to see in the first place.

So long story short ... Daryl = Good guy who no longer sells MC.

[Ric]

Daryl is a very good guy. In fact, my experience with Todd was very good as well. Moreover, but for mounting my rear bimini straps well aft of the ski pylon, their service department was great for the two times they did work for me (perfect pass and bimini install).

Now the guy that used to answer the phone in the parts dept. was another story. Fortunately, I knew enough to have all part numbers ready when I called so he didn't have to do much thinking. But he did always call me back, which was very much appreciated.

Yes, the comment about management is right on. Daryl would always bend over backwards to put out whatever fires got started while his back was turned. My brother in law would probably have bought a boat from them had his wife not gotten the sleazy sales tactics from one of the guys their (not Todd). When Daryl got wind of it from my brother in law, he gave my sister-in-law the personal tour of the facility and was nice enough to show her the boat she'd driven over there to see in the first place.

So long story short ... Daryl = Good guy who no longer sells MC. wholly crabapple, did east tx skier misuse the spelling of their here :eek:

[east tx skier]

What are you talking about?

[Sodar]

Moreover, but for mounting my rear bimini straps well aft of the ski pylon, their service department was great for the two times they did work for me (perfect pass and bimini install).

wholly crabapple, did east tx skier misuse the spelling of their here :eek:

I don't think so. Their is the possessive pronoun of they, showing the dealer's possession of the service department.... I think ETS is correct on this one Ric! :o 8p :o

[Ric]

What are you talking about? YOU DAWG! bwuahahhahahha

[Jorski]

did east tx skier misuse the spelling of "their" here

No he didn't...but many of the posters here do confuse, there, their and they're

[bcampbe7]

wholly crabapple, did east tx skier misuse the spelling of their here :eek:

Are you sure Ric???
I am with Sodar here. I think Doug is correct.

You should know better than to try to correct an English major's grammar.

[Ric]

No he didn't...but many of the posters here do confuse, there, their and they're yes he did, but he fixed it faster than canadians and californians could see8p

[east tx skier]

Maybe you just misread it on that orange screen on which you're running Windows 95.

[G-man]

I'll settle it, speak Texan thurr

[Ric]

Maybe you just misread it on that orange screen on which you're running Windows 95. it's 98, you uncultured swine :D

[east tx skier]

it's 98, you uncultured swine :D

I beg your pardon! I'm a cultured swine!

[tex]

Hello Graceland, my name is Doug and here is your new boat!

[Ric]

is that stock prop?

[tex]

is that stock prop?
Built it himself! I'm sure there is a thread about it somewhere.

[east tx skier]

That there is some ingenuity.

[Maristar210]

Maybe you just misread it on that orange screen on which you're running Windows 95.


I'm screaming on my 9600 baud dial up running a 486 with 33mhz and 4 megs of ram. Just upgraded from my Commodore 64 :cool:

[bcampbe7]

I'm screaming on my 9600 baud dial up running a 486 with 33mhz and 4 megs of ram. Just upgraded from my Commodore 64 :cool:


Look at you!








Quite braggin'! :D

[tex]

I'm screaming on my 9600 baud dial up running a 486 with 33mhz and 4 megs of ram. Just upgraded from my Commodore 64 :cool:
Commodore 64 hasn't been the same since Nicole's dad left them!

[Ric]

Commodore 64 hasn't been the same since Nicole's dad left them! I will admit, it took me a minute to get that one tex

[bcampbe7]

I will admit, it took me a minute to get that one tex


Slow processor!

[Ric]

Slow processor! It's a gift

[Jorski]

yes he did, but he fixed it faster than canadians and californians could see


Yeah, the quick edit...sorry about that Chief....


We are on Canadian time here !!!!!!!!!!!:(

[mayo93prostar]

OK, Eastie, what boat are you getting and when. come on, spill the beans.you know we love pics. plus, who really bought your 93 boat?

I hope this thread does not die like the swimsuit and 2008 boat threads...

[G-man]

The thread would die if he posted pictures of my boat that he wants to buy

[Ryan]

I thought your boat was black...

[TMCNo1]

The thread would die if he posted pictures of my boat that he wants to buy


I heard you would take, Credit Cards, Checks, Change, Cash or a Combination, Correct?????????????? Ain't that right, Ciller? :rolleyes: :uglyhamme :D

[Sodar]

I thought your boat was black...

I think it looks like this: http://www.tmcowners.com/photopost/data/500/196onwatere.jpg

[TMCNo1]

I think it looks like this: http://www.tmcowners.com/photopost/data/500/196onwatere.jpg


I see some RED!:cool:

[G-man]

There is some red, thinking of adding the red rubrail insert to help take eastie over the edge on the sale.

[Ryan]

I think it looks like this: http://www.tmcowners.com/photopost/data/500/196onwatere.jpg


We all know Gman's boat...

Now the last one had enough red to qualify, but that big hole in the bow wouldn't cut it. But maybe Doug will bend for the right price. I hear those 196's go for like $14000 used right G-Man? ;)

I'd bring a check down today if you sold for that price. :D

[G-man]

Someday I'll sell for 14000, about the time the 50th anniversary edition comes out . I taking deposits now

[TMCNo1]

Doug, good to hear you have purchased a new to you '98 boat! Enjoy!

[TMCNo1]

Mama said they'd be days like this!

[SDAhockey21]

At least you didn't get tazered!!

[Leroy]

You should have a PM, really you did nothing wrong, PM explains.

Interesting Mr. Moderator!

What did I post wrong and why was my post deleted, without notification of wrongdoing?

[Leroy]

Now that would be great if we were issued Tasers!

At least you didn't get tazered!!

[03 35th Anniversary]

Now that would be great if we were issued Tasers!Thats all we need is a trigger happy Moderator with a taser.......:shocked: 8p

[TMCNo1]

At least you didn't get tazered!!

Has anyone tried to Tazer themselves, now that would be interesting, especially if you couldn't let off the trigger!