PDA

View Full Version : trans fluid


JEREMY79
07-20-2007, 08:56 AM
what trans fluid goes in velvet drive 1:1? like in my boat?

H20skeefreek
07-20-2007, 09:07 AM
It should be ATF, but put in whatever you take out.

east tx skier
07-20-2007, 11:35 AM
Dexron III or Mercon. And like the man said, put in what you take out. Don't overfill.

beatle78
07-20-2007, 11:53 AM
..... welllll..... put in what you take out, only if the level is correct.

I bought my boat last fall and I watched what I took out, but I followed the manual for filling to make sure it's at the proper level. Now that it is perfect ;), I can put in what I take out :)

TRBenj
07-20-2007, 11:55 AM
Conventional Dexron/Mercon ATF is what you need. Ive heard great things about Valvoline, so thats what I run.

east tx skier
07-20-2007, 12:02 PM
..... welllll..... put in what you take out, only if the level is correct.

I bought my boat last fall and I watched what I took out, but I followed the manual for filling to make sure it's at the proper level. Now that it is perfect ;), I can put in what I take out :)

Make sure the boat itself is level if you rely on the dipstick.

Level = In the water