PDA

View Full Version : Perfect Pass DBW Install


endl
06-01-2007, 06:44 PM
Ok, I hated my Mastercraft Cruise, so I went and blew 900.00 on the PP system. I installed it last night, and man what a easy install. On my boat you open the front gull wing seat pull the removable carpet dash cover, mount the unit, plug the wires into it, swap the guage out plug into the harness and your done! Only thing I was a little unsure about was there is a harness plug for the motor, you have to plug into a harness that is not identified very well but I happened across it

sixysixss
06-01-2007, 07:44 PM
I believe that you will also have to have the eeprom re-flashed. When I switched from MC Cruise to PP, the PP would not engage. Dealer informed me that a re-flash was necessary. Congrats. I think the PP is much more responsive than the MC cruise and does not hunt asmuch to maintain speed.

llcamp63
06-01-2007, 10:31 PM
You don't have to flash a 2006 or newer MCX. Mine works perfect on my '06 X45.

endl
06-04-2007, 04:55 PM
You don't have to flash a 2006 or newer MCX. Mine works perfect on my '06 X45.
Yes that is correct for anyone who considers this in the future. 2006 and up does not need to be re-flased. 2005 does need to flashed. It is set up for the 350 MCX and you make adjustments if you have the 6.0 or 8.1.