View Full Version : strut bearings

01-31-2005, 10:22 PM
I would like to change my strut bearings on my 93' PS190.
Do you know which one of those items I should take?
Theyare referenced at SKIDIM.
BUSHING 1" I.D. X 1-1/4" item#2204
BUSHING 1" I.D. X 1-3/8" item#2205
BUSHING 1" I.D. X 1.5" item#2206
BUSHING 1-1/8" I.D. X 1-3/8" item#2207
BUSHING 1-1/8" I.D. X 1.5" item#2208

thanks for your help on that.

01-31-2005, 10:37 PM
Do you have ths 1.5:1 or 1:1 ratio transmission?

01-31-2005, 10:41 PM
1:1 ratio transmission

02-01-2005, 12:52 AM
Measure your shaft OD and the length of the strut housing you'll probably need 2 of the BUSHING 1" I.D. X 1-1/2" item#2206. They sit in the housing ends with a slight gap between for better water flow. Call Vince at SKIDIM to confirm, he's very knowledgeable.

02-01-2005, 12:58 AM
thanks for the info!

02-01-2005, 08:47 AM
I just ordered a set of bushings from SkiDIM. My '88 with a 1:1 takes the 1" x 1 1/4". Juat tell them what boat you have and they will send out the right part. Vince and everyone else there is great.