PDA

View Full Version : Lowrance 250 Info (Depth Finder)


wakescene
04-02-2007, 03:11 PM
I have a 2001 Maristar 210VRS. It has a Lowrance 250 Depth Finder in between the Speedo and Tach that I am looking to replace as the current unit has gone bad. I am trying to locate this unit online but to no avial.

2 Questions:
1. Anyone have info on this unit? (all it says is Lowrance 250 on the front and is Black w/Blue writing)
2. Anyone know the diameter hole this unit uses so that I can perhaps find a replacement unit to serve the same purpose?

Thanks,
KG

wakescene
04-04-2007, 06:23 PM
I'll add my own update here....

It's acutally a Lowrance 3500 Digital Depth finder.
It's mounted in a 2 1/8" hole. It's tied in electrically to the Ignition switch (purple) and also has a independent beeper.

MC jsut changed the P/N on this so I don't have the correct one at this time.

Thanks goes out to Jason from MC of Arkansas for help with this information.

DanC
04-04-2007, 07:38 PM
I didn't know what a 250 was but I do have a 3500 installed in my boat. Kinda hard to help ya without the right model number :uglyhamme
I have the installation and operation guide if you need it.

mlittle
04-11-2007, 01:20 AM
I don't know the part number for the one you are looking for specifically, but have you checked www.mymastercraft.com?? I found a few possible matches at their website but you might be able to confirm by email with them before ordering.

Here are a few listings they have under the General Parts/Gauges listings:

DEPTH FINDERw/HARNESS & AIR TEMP SENSOR '04 ALL MODELS $180.75

or

GAUGE-DEPTH FINDER 98-05 BLACK FACE / NO BEZEL USE WITH #50910 $116.97

or

TRANSDUCER-LOWARANCE FOR # 509104 ONLY $36.40

[QUOTE=wakescene]I'll add my own update here....

It's acutally a Lowrance 3500 Digital Depth finder.
It's mounted in a 2 1/8" hole. It's tied in electrically to the Ignition switch (purple) and also has a independent beeper.