PDA

View Full Version : Ballast Diagram For 07' X2


Jarabacoa
03-20-2007, 11:52 AM
Does any one have a diagram showing the ballast system for the 2007 X2? Thanks

c640947
03-20-2007, 10:41 PM
existing or how most of us add on?

Jarabacoa
03-21-2007, 04:17 PM
Existing, so I can see how I want to add on. Considering the Fly High system. Thanks.

wpstevenson
03-31-2007, 06:23 PM
I have a 2007 x2 I want to add bags on top of the tanks. The 06 X2 was easy, I Teed into the fill line and the factory system filled and empty the tank and bag. The 2007 system has timers in a control module not just relays. I tried to connect the bags but the system will only run for 4 min then shuts off, it will only run for 10 sec when it is turned back on. Any one know details on how the control module works? What resets the timer so it will run another 4 min?

Waterski-Marcoisland
03-31-2007, 09:39 PM
Look at my tread I started with adjusting the timers

wpstevenson
03-31-2007, 10:37 PM
Thanks I'll give it a try, does it have a max time you are allowed to add? I think I'll need to run the pump for about 8 min to fill the tank and bag. Last year I put a tee and filled the bag and tank at the same time, worked ok but the tanks would over flow and the bag would take a while to completely fill. This year I'm going to connect the pump to the bag then overflow the bag into the tank, then out the tank overflow. See any issues this way?

wpstevenson
04-03-2007, 10:43 AM
The timer must wrap around to zero, it lookes like 6 min is as high as you can program the counter then wrapes back around to zero. I entered what should have been 6 min 30 sec on the port side but the pump would only run 30 sec before sutting off. I added more time again and got it back to 5.5 min up from the factory setting of 4.5 min. I could not get the center pump module to go into program mode???? Does anyone know how to reset the system to factory default?