PDA

View Full Version : "GREAT STUFF" spray foam


atlfootr
01-08-2007, 10:39 PM
On 12-03-2005, This guy actually took those pics @ the Malibu factory and MC made a display with it.

Frame up the hull and inner liner and shoot full of foam, will not sink.

Cleaned up, these boats are made like tanks and when you see how thick the hull is!

jimmer2880
01-09-2007, 06:12 AM
Wow.... what a mess. I've gotten the "great stuff" on my skin before. leaves nice tatoos :) Glad that's not my job:rolleyes:

Leroy
01-09-2007, 06:56 AM
If these pictures are from Malibu, I have the same two from my MC tour and it looks very similar!

Diesel
01-09-2007, 05:57 PM
I don't get it? :confused:

TOO-TALL
01-09-2007, 06:34 PM
I don't get it? :confused:


Me too:rolleyes: :rolleyes: :confused: :

Upper Michigan Prostar190
01-09-2007, 07:08 PM
Me too
me three:confused: :confused:

Ric
01-09-2007, 07:33 PM
I don't get it? :confused: count me in:rolleyes:

Chief
01-09-2007, 07:34 PM
Ditto. I would assume that Malibu construction better with the unsinkable tank?

Leroy
01-09-2007, 08:04 PM
Atlantafooter said:

On 12-03-2005, This guy actually took those pics @ the Malibu factory and MC made a display with it.

Frame up the hull and inner liner and shoot full of foam, will not sink.

CLEAR?

Ric
01-09-2007, 08:23 PM
Atlantafooter said:

On 12-03-2005, This guy actually took those pics @ the Malibu factory and MC made a display with it.

Frame up the hull and inner liner and shoot full of foam, will not sink.

CLEAR? Ya, no, I don't get it

roddydog
01-09-2007, 08:30 PM
Yea. Is that the form, or What????
Looks too big to be the boat!

JohnnyB
01-09-2007, 09:19 PM
I'm not following either

Leroy
01-09-2007, 10:03 PM
I do have to say I'm confused since these appear to be the same pictures I posted some time ago?

Monte
01-09-2007, 10:05 PM
I 10th do not understand

Leroy
01-09-2007, 10:07 PM
Really looks the same to me. I took these pictures on factory tour earlier.

sand2snow22
01-09-2007, 10:11 PM
Me 69 don't understand....

Leroy
01-09-2007, 10:15 PM
Maybe atlftr doubled up on the medicine from his skin surgery?

I'm sure those are my pictures.....

Monte
01-09-2007, 10:25 PM
Maybe atlftr doubled up on the medicine from his skin surgery?

I'm sure those are my pictures.....

Mastercraft plant???:confused:

Leroy
01-09-2007, 10:33 PM
Yes, we went on the tour April 5th 2004. Lots of pictures and a video.

Mastercraft plant???:confused:

bcampbe7
01-09-2007, 10:43 PM
I am not sure which manufacturer those are from but it is 2 different steps in the boat building process.

Looks like the first one is some sort of press and the second is with the press removed.

Leroy
01-09-2007, 10:46 PM
The process is the first one with the frame is where the foam is injected. The frame holds the floor and hull together. THe second one is with the frame removed and the bottom half cleaned up.

Upper Michigan Prostar190
01-10-2007, 09:17 AM
I am still confused. I dont understand this thread.

Is Ric a chick?

Sodar
01-10-2007, 09:26 AM
Wow, reading the first post hurt my head! All I got to say is... HUH!?!?

Upper Michigan Prostar190
01-10-2007, 09:37 AM
Wow, reading the first post hurt my head! All I got to say is... HUH!?!?
I just went back and read it again, and yea, it does hurt a bit. :confused: :confused:

Ric
01-10-2007, 06:03 PM
On 12-03-2005, This guy actually took those pics @ the Malibu factory and MC made a display with it.

Frame up the hull and inner liner and shoot full of foam, will not sink.

Cleaned up, these boats are made like tanks and when you see how thick the hull is! Reboot man......... Reboot!!!!!

corey
01-11-2007, 11:03 AM
Those both appear to be MasterCraft Factory shots. The first is the jig where the expanding foam is put in, the second is the finished floor piece. many companies do not use a fiberglass floor, so MC is one of the only factories you would see this type of process. Basically this section will get carpeted, then the decking/seat base will be installed on top.

Most of the new V-drives and the new 214 use a different construction but the 197 and 205V both share this construction.

TMCNo1
01-11-2007, 11:15 AM
I am still confused. I dont understand this thread.



Neither do I, that's why I use Uckum Pucky "A" for the big holes and Uckum Pucky "F" for for the little ones!

Monte
01-11-2007, 11:18 AM
Neither do I, that's why I use Uckum Pucky "A" for the big holes and Uckum Pucky "F" for for the little ones!

That didn't help #1 :uglyhamme

captain planet
01-11-2007, 11:21 AM
I'm with the rest of you on this, I don't follow.

Upper Michigan Prostar190
01-11-2007, 12:49 PM
Did anyone ever figure out what this thread was about?:confused:

TMCNo1
01-11-2007, 12:58 PM
Did anyone ever figure out what this thread was about?:confused:


Why are you asking, you are our LEADER and you should know!
Uckum Pucky "AS" (Ah S***) can be used to fill large voids, especially between the ears from what I hear!
Maybe they are talking about Uckum Pucky "BF" (boat float), who knows!
Is it Sprang yet?