PDA

View Full Version : Trailer rim size help and prop removal help


badboy132
12-20-2006, 08:21 PM
I have a 98 30th Anniv prostar 190 and am going to buy an extra rim for the trailer. Does anyone know if it is a 5 x 4.5 or 5 x 4.75 bolt pattern on the factory rims? I can't seem to measure it right.

Also,

I am going to take the prop off and get it fixed.....do I need a special tool to do it, and if so, any idea where I can get one/cost?

Thanks in advance!


Jeff

east tx skier
12-20-2006, 08:32 PM
Hi Jeff. As to the last question, you'll need a prop puller and a big wrench. In a traditional puller, get one for a four blade as they'll do either 3 or 4 blade props. But a 3 blade won't do a four. Ski dim has them for probably around $70. Acme sells a harmonic prop puller (screws on and you whack it with a hammer) that's about $30 bucks.

I think the rims are the 4.5". I started a thread a while back about this. Give it a search. The rims on my 93 should be the same as for 98.

Footin
12-20-2006, 09:22 PM
They are 5 on 4.5

badboy132
12-20-2006, 09:29 PM
Thanks guys!

Again all my questions are answered.

Does anyone need a get-out-of-jail-free card?