PDA

View Full Version : 1992 205 side panels


BradD
09-21-2006, 09:41 AM
I want to remove the side panels from my boat to get them recovered. It is easy to locate the 2 bolts Top and Bottom, that hold the rear of the panel to the boat. Can anyone help me locate the remainder of the fasteners?
I want to know the number of bolts holding so that I don't "think" i have them all and start pulling to persuade it loose, only to have it snap.
THanks to all.

BradD
09-22-2006, 08:52 AM
I was hoping to work on this over the weekend. Any advice would be very welcomed. Thanks.

BrianM
09-22-2006, 09:25 AM
The combing pads on my '97 190 have two bolts at the rear and then three across the top under the gunnel and two more in the front. Just stick your head in there and take a look around. Remove all you can see and the carefully pull. If you can't get it off you will have to look around for some more fastners. Should be a pretty simple job.