PDA

View Full Version : Need decal measurements


Hoff1
08-09-2006, 10:01 AM
Could someone take some measurements of their decals, the side ones. Iím looking at getting some made and am thinking about enlarging the MasterCraft logo on the sides to the size that is currently be used. Iím looking for the height and overall width. Thanks.

Hereís what mine look like and here is the size I would like to go to. The following image was copied from the showroom (Codyís boat, all rights reserved).

Hoff1
08-11-2006, 01:15 PM
anyone?? anyone??

cwright
08-11-2006, 05:49 PM
Overall width is 51.25

M is 6 - 3/4w X 5h
C is 5 - 3/4w X 5h
a is 4 - 13/16w X 3 - 13/16h
e is 4 - 1/4w X 3 - 3/4h
t is 3 - 1/16w X 4 - 5/8h
r is 3 - 1/16w X 3 - 9/16h
f is 3.24w X 5.0625h

Some of the 1/16" differences could be from decal stretch during application. Hope this can do it for you.

Hoff1
08-14-2006, 08:43 AM
Overall width is 51.25

M is 6 - 3/4w X 5h
C is 5 - 3/4w X 5h
a is 4 - 13/16w X 3 - 13/16h
e is 4 - 1/4w X 3 - 3/4h
t is 3 - 1/16w X 4 - 5/8h
r is 3 - 1/16w X 3 - 9/16h
f is 3.24w X 5.0625h

Some of the 1/16" differences could be from decal stretch during application. Hope this can do it for you.

Thanks a lot, very helpful and more than I was expecting. I owe you a cold one.