PDA

View Full Version : Window Plate needed


BradD
07-20-2006, 03:03 PM
Not sure what to call it actually, but the step thru window on my 205 has a crack in the aluminum plate that nest onto the driver side window. I had someone try to weld it, but they made it look even worse.
Your help would be much appreciated.

xsvfooter
08-02-2006, 03:50 PM
I had the same problem on my tristar 190. MC doesn't sell the window frame piece, just the whole window with the piece installed. I've found a few places that sell lots of hardware. I've bought the windshield brace that connects from the upper window to the dash and the plastic window window latches from shipstore.com. You may want to look at taylormarine.com. They maybe the original manufacturer of the windshiled system. You might be able to order part through them.

bigmac
08-02-2006, 05:13 PM
I don't know about your boat, but the walkthrough on my buddy's Four Winns (glass frame also made by Taylor) measures the same as the one on my boat and has the same hinges.