PDA

View Full Version : 1993 Prostar belt


stumbledog
07-17-2006, 05:55 PM
What belt should I be using for my alternator/water pump? Brand and stock #?

Hoosier Bob
07-17-2006, 09:15 PM
I am due as well. I will check mine to see if numbers are visible. I will also check my manual. See you in a few!:D What belt should I be using for my alternator/water pump? Brand and stock #?

Farmer Ted
07-17-2006, 09:19 PM
I am due as well. I will check mine to see if numbers are visible. I will also check my manual. See you in a few!:D


The Indmar part number should be on the belt....

or Skidim

east tx skier
07-17-2006, 09:22 PM
Took my boat to an auto parts store and had them come out and look at it. Ran me about $10 and no more screech on start up.

Hoosier Bob
07-17-2006, 09:29 PM
My part number is Indmar 72-5015 and I found it here at Skidom.

http://www.skidim.com/prodinfo.asp?number=25-7440

I am still looking for a crossreference. You can always do the rope method of measurement.:o

Hoosier Bob
07-17-2006, 09:32 PM
Here it is at NAPA Auto!
http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=430&OEMPartNum=72-5015

Even gives you the dimensions!
I purchased mine from NAPA today! Part number (new) XL 25 7448
Dimensions 25/64 x 45-3/8 or 10.3 mm x 1155mm.

stumbledog
07-25-2006, 04:45 PM
Thanks for the part #. Went to NAPA and got what I needed. New belt works great with no noise. Bought an extra too.

When I bought the boat, I assumed it had the right belt on it and just purchased an identical couple of belts. Bad move on my part.