FEATURES
Cancel
  • Construction
  • Styling
  • Performance
  • Inboard Advantage
  • Power
  • Standards & Options
  • Trailers
  • Features

    • Construction
      • Drilling & Grinding
      • Environment
      • Research & Development
      • Mold Maintenance
      • Q&A Checkpoints
      • Gelcoat
      • Resin Counter
      • Anchorlok
      • Dash Assembly
      • Stringers
      • Upholstery
      • Fiberglass Sheet Room
      • Trailers
    • Styling
      • Pickle Fork Bow
      • New Graphics
      • Diamond Transom
      • Walk-Through Transom
      • Billet Vents
    • Performance
      • Underwater Gear
      • R&D Validation
      • Murphy Gauges
    • Inboard Advantage
      • Less Draft
      • Power Control
      • Superior Handling
      • Swim Safe
    • Power
      • Ilmor MV8 - 5.7L
      • Ilmor MV8 - 6.0L
      • Ilmor MV8 - 6.2L
      • Ilmor MV8 - 7.4L
    • Standards & Options
      • Underwater Gear
      • In-Tank Fuel Pump
      • Spline Shaft
      • Hand-Laid Fiberglass
      • Muffler
      • Non-Corrosive Hardware
      • Masterview Bolster Seat
      • Swivel Board Racks
      • Ski Pylons
      • JL Audio System
      • Garapa Gold Boarding Platform
      • Automatic Bilge System
      • Premium Vinyl
      • Ballast System
      • Steering Wheel
      • Murphy Gauges
    • Trailers
      • Trailer Shop
      • Ramp-N-Clamp
      • Pivot Tongue
      • Custom Trailers
      • Trailer Lights
      • Disc Brakes
      • Electric Brake Release
      • Prop Guard

    Construction

    Drilling & Grinding

    Drilling & Grinding

    We combine the best of old-school craftsmanship with new-school technology in every MasterCraft. Rather than rely on random placement of upholstery, grab rails, and other items attached to the boat, we jig every one to ensure that every part goes in the correct place, every time.

    Environment

    Environment

    Within our 250,000 sq. ft. facility, MasterCraft binds itself by the disciplines of Six Sigma and Lean Manufacturing to create a clean, controlled environment. We are the only boat manufacturer to have achieved global ISO 9001:2008, 14001, and OHSAS 18001 certifications from Alliance International, LLC. In fact, MasterCraft was even a finalist for Industry Week's "Best Plant Award." The result? The best quality in our class, a safe workplace for employees, and minimized impact on the environment through lowered emissions and increased recycling.

    Research & Development

    Research & Development

    Since our first boat in '68, innovation has been a hallmark of the MasterCraft brand. Our designers and engineers transform cutting-edge vision into on-water reality using some of the most sophisticated technologies available, while our elite team of validation specialists ensures every model is rigorously tested in the harshest conditions.

    Mold Maintenance

    Mold Maintenance

    Molds are at the heart of every boat built by MasterCraft, which is why we maintain every one with such fervor and care. Molds are thoroughly waxed every 2-4 uses and detailed every 50 by one of the industry's only dedicated department of full-time mold-care specialists.

    Q&A Checkpoints

    Q&A Checkpoints

    MasterCraft owners deserve more than a boat that's simply "assembled." Every part is inspected structurally and aesthetically throughout our build process. And our team of quality assurance inspectors continually audits each boat to ensure it meets our stringent standards before passing the gelcoat, lamination, and final-finish stations and the intense on-water test.

    Gelcoat

    Gelcoat

    With the industry's highest-grade gelcoat and an experienced team of application specialists, MasterCraft gives each boat an enduring, lustrous look right out of the mold.

    Resin Counter

    Resin Counter

    To ensure the highest quality control during every phase of the lamination process, resin counters at each lamination station guarantee a consistent spray of laminate to eliminate excess weight and materials.

    Anchorlok

    Anchorlok

    Steel, aluminum, and high-density polyethylene (HDPE) are laminated into each liner, hull, and deck so that every external item is securely anchored to withstand any high-pressure force and reduce the potential of gelcoat cracks over time.

    Dash Assembly

    Dash Assembly

    An in-house sub-assembly department pieces together all small components, like the dash, so that our supply chain is reduced to hours, not weeks. Once assembled, the small parts move to the rigging line, where they are installed and tested for performance.

    Stringers

    Stringers

    A MasterCraft's all-composite framework is centered around foam stringers that provide rigidity, while also helping to dampen sound and vibration.

    Upholstery

    Upholstery

    MasterCraft cuts, sews, and finishes all of our upholstery in-house, utilizing first-rate materials like triple-density foam and premium grade vinyl with UV protection and mildew and stain resistors.

    Fiberglass Sheet Room

    Fiberglass Sheet Room

    MasterCraft uses the latest precision technology in the cutting-room to pre-cut all fiberglass sheets for individual models, ensuring consistency and guaranteeing each boat follows a pre-determined lamination schedule.

    Trailers

    Trailers

    It's no surprise to learn we make our own trailers. An entire team of engineers is dedicated to making sure our trailers match the legendary build quality and attention to detail you get with our boats. Graphics, lighting and wheel colors offer plenty of ways to make it uniquely yours while double-welded seams, premium quality steel, huge disc brakes and a perfect fit for each hull give you the piece of mind to know your ride will get there safely.

    Styling

    Pickle Fork Bow

    Pickle Fork Bow

    MasterCraft's signature open Pickle Fork Bow gives your guests a front row seat to unlimited horizons.

    New Graphics

    New Graphics

    All 2016 MasterCraft graphics are designed with two purposes in mind: to make people stare more and to have you explain less.

    Diamond Transom

    Diamond Transom

    The style of the diamond-shaped transom and boarding platform typifies MasterCraft's ability to find the pulse of cutting-edge design without sacrificing relevance.

    Walk-Through Transom

    Walk-Through Transom

    Get in and out of the action with ease. The non-slip pad features an integrated step/seat for gearing up to get down.

    Billet Vents

    Billet Vents

    Bright dipped anodized aluminum will never crack or fade. It will look as good in 20 years as it does today. You just can't say that about plastic.

    Performance

    Underwater Gear

    Underwater Gear

    Investment cast nibral rudders and struts offer a superior strength-to-weight ratio and give each MasterCraft a sure grip on the water.

    R&D Validation

    R&D Validation

    Since our first boat in '68, innovation has been a hallmark of the MasterCraft brand. Our R&D department is the industry's largest, all to provide you with exactly the running surface and the boat that's right for your needs. MasterCraft's engineering staff alone brings more than 150 years of collective experience to the table, including the refined expertise of a naval architect. They transform cutting-edge vision to on-water reality using some of the most sophisticated design technologies available, while our elite team of validation specialists ensures every model is rigorously tested in the harshest conditions.

    Murphy Gauges

    Murphy Gauges

    A single touch screen lets you see and set all operating speeds and feeds, store rider preferences for the Gen 2 Surf System, or playback footage from the GoPro camera.

    Inboard Advantage

    Less Draft

    Less Draft

    Worried that a VectorDrive inboard won't allow you in the shallows? Don't be. Our boats draws less water than comparable stern-drives, allowing you to explore more shorelines in search of the perfect sandbeach playground.

    Power Control

    Power Control

    With a VectorDrive inboard boat, power goes directly to the prop, meaning greater torque and pulling power. And thanks to a separate, rack-and-pinion-driven rudder system, our boats turn easier than a sterndrive's bulky out-drive.

    Superior Handling

    Superior Handling

    Turning is immediate and precise on VectorDrive inboard boats, thanks to a rudder that is positioned directly in the slipstream of the propeller. With a wider range of motion than a huge stern-drive unit, our boats turn quicker, tighter, and with greater efficiency.

    Swim Safe

    Swim Safe

    VectorDrive inboard units are tucked neatly under the boat, in and away from swimmers and wayward feet. Thanks to an integrated boarding platform, they are also easier to get on and off the boat safely. (Never be on or around a boarding platform while the engine is running.)

    Power

    Ilmor MV8 - 5.7L

    Ilmor MV8 - 5.7L

    Durable, reliable, efficient.
    AWSA tournament certified.

    Power:  239 kW @ 5000 RPM / 320 HP
    Torque:  365 Ft-Lbs @ 4200 RPM

    Standard Features Include: Uniquely designed cast iron and catalyst equipped, thermostatically controlled exhaust manifolds Front accessory drive with "true" serpentine auto-tensioning belt Advanced engine protection: Over-temperature protection mode, knock detection with auto-protect, and soft rev limiter Multi-port sequential fuel injection for improved fuel distribution and improved engine air in-take, maximizing engine performance and fuel efficiency Common remote-mount thermostat cooling system with belt-driven raw water pump offering reduced exhaust condensation and pump durability Super Ultra Low Emissions meeting EPA, CARB and EU emissions regulations Serviceability - Designed with the Customer in Mind: High mount alternator and starter motor Conveniently positioned remote mount oil filter with courtesy tray Centrally located fuses, relays and circuit breakers with compact fuse box, easily identifiable fuses, and a 50A auto-reset circuit breaker to prevent temporary problems to ensure an enjoyable day of boating Custom electronics wiring harness design with minimal excess wiring and easily identifiable connectors Service and Warranty: Every Ilmor Marine engine comes standard with a five-year limited engine warranty Extended warranty may be available through your authorized MasterCraft dealer

    Ilmor MV8 - 6.0L

    Ilmor MV8 - 6.0L

    Variable valve timing for extra performance.

    Power:  285 kW @ 5200 RPM / 382 HP
    Torque:  411 Ft-Lbs @ 4200 RPM

    Standard Features Include: Uniquely designed cast iron and catalyst equipped, thermostatically controlled exhaust manifolds Front accessory drive with "true" serpentine auto-tensioning belt Advanced engine protection: Over-temperature protection mode, knock detection with auto-protect, and soft rev limiter Multi-port sequential fuel injection for improved fuel distribution and improved engine air in-take, maximizing engine performance and fuel efficiency Common remote-mount thermostat cooling system with belt-driven raw water pump offering reduced exhaust condensation and pump durability Super Ultra Low Emissions meeting EPA, CARB and EU emissions regulations Serviceability - Designed with the Customer in Mind: High mount alternator and starter motor Conveniently positioned remote mount oil filter with courtesy tray Centrally located fuses, relays and circuit breakers with compact fuse box, easily identifiable fuses, and a 50A auto-reset circuit breaker to prevent temporary problems to ensure an enjoyable day of boating Custom electronics wiring harness design with minimal excess wiring and easily identifiable connectors Service and Warranty: Every Ilmor Marine engine comes standard with a five-year limited engine warranty Extended warranty may be available through your authorized MasterCraft dealer

    Ilmor MV8 - 6.2L

    Ilmor MV8 - 6.2L

    Enhanced performance, fuel delivery, ignition and idling in a lightweight package.

    Power:  321 kW @ 5400 RPM / 430 HP
    Torque:  445 Ft-Lbs @ 4400 RPM

    Standard Features Include: Uniquely designed cast iron and catalyst equipped, thermostatically controlled exhaust manifolds Front accessory drive with "true" serpentine auto-tensioning belt Advanced engine protection: Over-temperature protection mode, knock detection with auto-protect, and soft rev limiter Multi-port sequential fuel injection for improved fuel distribution and improved engine air in-take, maximizing engine performance and fuel efficiency Common remote-mount thermostat cooling system with belt-driven raw water pump offering reduced exhaust condensation and pump durability Super Ultra Low Emissions meeting EPA, CARB and EU emissions regulations Serviceability - Designed with the Customer in Mind: High mount alternator and starter motor Conveniently positioned remote mount oil filter with courtesy tray Centrally located fuses, relays and circuit breakers with compact fuse box, easily identifiable fuses, and a 50A auto-reset circuit breaker to prevent temporary problems to ensure an enjoyable day of boating Custom electronics wiring harness design with minimal excess wiring and easily identifiable connectors Service and Warranty: Every Ilmor Marine engine comes standard with a five-year limited engine warranty Extended warranty may be available through your authorized MasterCraft dealer

    Ilmor MV8 - 7.4L

    Ilmor MV8 - 7.4L

    The most powerful catalyzed production marine engine in the world.

    Power:  390 kW @ 5800 RPM / 522 HP
    Torque:  524 Ft-Lbs @ 4400 RPM


    Standard Features Include: Uniquely designed cast iron and catalyst equipped, thermostatically controlled exhaust manifolds Front accessory drive with "true" serpentine auto-tensioning belt Advanced engine protection: Over-temperature protection mode, knock detection with auto-protect, and soft rev limiter Multi-port sequential fuel injection for improved fuel distribution and improved engine air in-take, maximizing engine performance and fuel efficiency Common remote-mount thermostat cooling system with belt-driven raw water pump offering reduced exhaust condensation and pump durability Super Ultra Low Emissions meeting EPA, CARB and EU emissions regulations Serviceability - Designed with the Customer in Mind: High mount alternator and starter motor Conveniently positioned remote mount oil filter with courtesy tray Centrally located fuses, relays and circuit breakers with compact fuse box, easily identifiable fuses, and a 50A auto-reset circuit breaker to prevent temporary problems to ensure an enjoyable day of boating Custom electronics wiring harness design with minimal excess wiring and easily identifiable connectors Service and Warranty: Every Ilmor Marine engine comes standard with a five-year limited engine warranty Extended warranty may be available through your authorized MasterCraft dealer

    Standards & Options

    Underwater Gear

    Underwater Gear

    Technology has improved even the most traditional underwater gear, holding design specifications within a .005-inch tolerance for superior performance.

    In-Tank Fuel Pump

    In-Tank Fuel Pump

    Designed by MasterCraft to maximize fuel efficiency, reduce vapor lock and safeguard boaters, our exclusive in-tank fuel pump pushes fuel to the engine, rather than pulling it.

    Spline Shaft

    Spline Shaft

    To minimize vibration and prop slippage, our shaft and coupler use a fitted tongue-and-groove design, which requires fewer parts and tools, making maintenance quick and easy.

    Hand-Laid Fiberglass

    Hand-Laid Fiberglass

    Our hand-laid and hand-rolled fiberglass method-standard since 1983-ensures that each boat receives a calculated lamination schedule in high-stress areas, built to withstand not just years of boating, but decades.

    Muffler

    Muffler

    Don't worry about keeping sound down in a MasterCraft. Unlike our competition, noise-reducing fiberglass mufflers are available on every boat we offer.

    Non-Corrosive Hardware

    Non-Corrosive Hardware

    Stainless steel bolts, nuts, screws, washers, clamps, staples, and insert nuts protect every boat's beauty, integrity, and longevity against the harsh elements of water.

    Masterview Bolster Seat

    Masterview Bolster Seat

    Completely re-engineered for 2016, our helm seat increases ergonomic comfort by reclining, swiveling and elevating into place with a dynamic hydraulic lift system.

    Swivel Board Racks

    Swivel Board Racks

    Easily clamp your boards into place for increased stow-away space and swivel your equipment 180° into the boat for boathouse storage.

    Ski Pylons

    Ski Pylons

    We pull no punches with our pylons. Each is constructed of solid aluminum, anodized to prevent wear and then through-bolted into steel plates eight to 16 times to sustain merciless torque. It's topped off with a WearGuard nylon inset to prevent rope chafe.

    JL Audio System

    JL Audio System

    Have a blast aboard a MasterCraft, with the JL Audio interior and tower speakers, designed exclusively for MasterCraft. Controlled by a premium head unit, our standard speakers optimize sound clarity inside and out.

    Garapa Gold Boarding Platform

    Garapa Gold Boarding Platform

    Big is beautiful: MasterCraft's oversized exotic Garapa Gold wood platform is the perfect place for putting on equipment, teaching young ones how to ski, or getting back on board.

    Automatic Bilge System

    Automatic Bilge System

    Forgot to hit the auto bilge switch? Don't worry. MasterCraft does it for you with a bilge system that automatically senses bilge water level and empties it.

    Premium Vinyl

    Premium Vinyl

    Your upholstery should look as good as your boat. MasterCraft's premium-grade marine vinyl is puncture resistant with UV protection, mildew resistors, and stain-resistant treatment that maintains its shape, luster and color for years.

    Ballast System

    Ballast System

    Rotocast tanks positioned above and beneath the floor utilize their own industrial-sized pumps to quickly ingest up to 1,000 lbs of water weight in under five minutes.

    Steering Wheel

    Steering Wheel

    Even with an element as basic as a steering wheel, MasterCraft makes you look good on the water. With our four-spoke, vinyl-wrapped, polished aluminum steering wheel, (standard on most models) you'll make all the turns in style.

    Murphy Gauges

    Murphy Gauges

    Touch the screen and you are calling the shots. Our performance Murphy 7-inch and 4.3-inch digital screens provide the driver with access and full control to the entire boat. Complexity, simplified.

    Trailers

    Trailer Shop

    Trailer Shop

    Forged from raw, premium steel, MasterCraft trailers are specifically designed to cradle your boat in form-fitting support while on the road or in your garage.

    Ramp-N-Clamp

    Ramp-N-Clamp

    Talk about simple: the optional Ramp-N-Clamp automatically locks onto the bow eye when you drive onto the trailer, meaning you don't have to get out of the boat or car for loading. To launch, back the trailer in the water and pull the handle up to release your boat.

    Pivot Tongue

    Pivot Tongue

    So you need a precious few inches to store your boat? No worries. Simply pull the pin and collapse the tongue for 18 inches of additional space.

    Custom Trailers

    Custom Trailers

    The link between land and water is the trailer. And everything is riding on that journey. So we make insanely great trailers. Each is custom built for the boat it carries, in the same factory and with the same quality. Innovative features. Premium materials. Designed from experience to deliver high performance. And with many low profile wheel options to choose from, the cradle for your baby rides in complimentary style.

    Trailer Lights

    Trailer Lights

    Burn daylight and come into the ramp late. Our exclusive MasterCraft Shield Lamp and high output LED reverse lights make loading your MasterCraft safe and easy.

    Disc Brakes

    Disc Brakes

    All MasterCraft trailers feature huge disc brakes and torsion axle suspension for maximum stopping power and a smooth ride over the bumpiest of roads and ramps.

    Electric Brake Release

    Electric Brake Release

    Forget the pigtail: With the new Jet Connex coil trailer connector, you're in control thanks to an integrated electronic brake release that disengages the brakes in reverse.

    Prop Guard

    Prop Guard

    Eliminate ramp, road, and driveway gouges and protect your prized prop at the same time with MasterCraft's sturdy prop guard and steel caster wheels.

    ×