Multi-Function Gauge

This gauge provides several functions of interest and support to the boater. 

As a tachometer, it indicates the engine speed in crankshaft revolutions per minute (RPM).
Propeller shaft RPM is the same as the engine rotation except for boats equipped with the Power Slot 1.5:1 ratio package or a V-drive gear, in which case propeller shaft RPM is less than that of the engine RPM.

Toggle to the hourmeter and it registers the accumulated engine operating time. Use the hourmeter to keep accurate logs for scheduled maintenance. Replacing the computer (known as the MMDC) will erase the hours. It counts hours only when the engine is above 300 RPM. When equipped with a revision C MMDC, the option exists to change the display to metric from the hours screen. This is done by holding down the gauge selection display button for three seconds. When prompted, select English or metric display. Wait an additional three (3) seconds and the display will return to normal operation.

Toggle to the air temperature gauge (optional) to get an approximate reading of the ambient air temperature above the waters surface.

Toggle to the clock for the convenience of determining the time.

MasterCraft Team Talk

Recent Forum Activity

  • 1998 Maristar 200 VRS project

    After 2 years working on it we put it in the water on Friday!!! Everything went very well. Video clip - that's my son driving: I still need to reinstall the carpeted panels around the motor and on the sides under the lounge pad, there was a lot o...

    Read More

  • Which tower for my 85 S&S?

    Compared to Texas yeah, it's expensive. It blows me away what houses sell for down South, but the area I'm in isn't too bad. British Columbia is expensive, and it's tough to make a good income there. Alberta Mo Bettah! Alberta No Ka Oi!...

    Read More

  • 89 prostar 190 questions

    That was the original aluminum part, just cleaned and scuffed up before installation. Due to the vibration associated with that area, West Systems recommended Gflex but probably any good quality epoxy resin would work just fine. I actually reposit...

    Read More

News & Announcements

Updates and News From MC

  • Harley Wins Grand Rapids PWT

    Thousands of fans lined the shores of Millennium Park to witness the final stop of the 2014 MasterCraft Pro Wakeboard Tour, presented by Rockstar Energy. Boardshorts, bikinis and excellent wakeboarding conditions were on-point durin...

    Read More
  • High-Flyiing Day of Action at the PWT in Grand Rapids

    A dramatic day of action at Millennium Park culminated with a multitude of inspiring performances at day one of the MasterCraft Pro Wakeboard Tour, presented by Rockstar. Top wakeboarders Harley Clifford (AUS), Rusty Malinoski (CDN) and S...

    Read More
×